GL502VS rev 2.0 turns off after 30 min

[kropotkin]

Good time of the day
We have GL502VS rev 2.0 cpu I7 6700 hub HM170 vc 1070
One year ago we replaced HM170 on it and everything was ok with bios file, taken from here. This year it came with dead hub again. After replacement we got a problem of turning off after 30 min. Neither mentioned above bios nor prepared from original backup solve the problem. We relpaced HM170 to another one - also without result
What might be wrong else?

Here is our original bios, saved last year

[Stevedb]

Re: GL502VS rev 2.0 turns off after 30 min

Hi you need to clean me region of your bios dump.

Regards

[hoaca388]

Re: GL502VS rev 2.0 turns off after 30 min

good time of the day
we have gl502vs rev 2.0 cpu i7 6700 hub hm170 vc 1070
one year ago we replaced hm170 on it and everything was ok with bios file, taken from here. This year it came with dead hub again. After replacement we got a problem of turning off after 30 min. Neither mentioned above bios nor prepared from original backup solve the problem. We relpaced hm170 to another one - also without result
what might be wrong else?

Here is our original bios, saved last year

rog gl502vs

[kropotkin]

Re: GL502VS rev 2.0 turns off after 30 min

rog gl502vs

Hi.
This BIOS file also do not solve the problem. Board switches off roughly after 30 min, even in BIOS setup (out of OS). After swiching off, charge indicator fades out also.
Therefore problem somewhere else, as HM170 was replaced twice

[SMDFlea]

Re: GL502VS rev 2.0 turns off after 30 min

Hi.
This BIOS file also do not solve the problem. Board switches off roughly after 30 min, even in BIOS setup (out of OS). After swiching off, charge indicator fades out also.
Therefore problem somewhere else, as HM170 was replaced twice

If a boardview is available look for the ME_disable strap ,and check around the audio IC for corrosion. Did you get the HM170 from a trusted source, is it used , from a donor board