Bios lenovo idepad 3 14igl NM-C961 rev 1.0

[cokan kepo]

Pleas help,
I need bios for Lenovo Ideapad 3 14IGL kode board NM-C961 rev 1.0...
Problem is no display.

[peste]

Re: Bios lenovo idepad 3 14igl NM-C961 rev 1.0

Pleas help,
I need bios for Lenovo Ideapad 3 14IGL kode board NM-C961 rev 1.0...
Problem is no display.

always when you make a bios request, also post the original bios of the laptop, even if it is corrupted..

[cokan kepo]

Re: Bios lenovo idepad 3 14igl NM-C961 rev 1.0

always when you make a bios request, also post the original bios of the laptop, even if it is corrupted..

this file bios from origin(backup).

[hirens]

Re: Bios lenovo idepad 3 14igl NM-C961 rev 1.0

board number :rev: 1.0 nm-c961
gs453/gs553
2019-12-27

need bios
my dump has no display
the sticker with serial number is blank i cant get hold of it

[snar]

Re: Bios lenovo idepad 3 14igl NM-C961 rev 1.0

hi everyone can someone please help me the problem for this LENOVO laptop is No Display. the board model is
GS453/GS553
NM-C961 REV: 1.0
2019-12-27
I attached the original bios. thanks in advance

[SMDFlea]

Re: Bios lenovo idepad 3 14igl NM-C961 rev 1.0

hi everyone can someone please help me the problem for this LENOVO laptop is No Display. the board model is
GS453/GS553
NM-C961 REV: 1.0
2019-12-27
I attached the original bios. thanks in advance

Post the laptop serial number

.

[snar]

Re: Bios lenovo idepad 3 14igl NM-C961 rev 1.0

Thank you for the response master smdflea. Sad to say the serial is already erase.

[peste]

Re: Bios lenovo idepad 3 14igl NM-C961 rev 1.0

Thank you for the response master smdflea. Sad to say the serial is already erase.

bios extracted from Lenovo website update for... V14-IGL, V15-IGL, ideapad 3-14IGL05, ideapad 3-15IGL05

DMI 483000 - 484FFF

[snar]

Re: Bios lenovo idepad 3 14igl NM-C961 rev 1.0

thank you master peste. il update the result later. thank you very much

[snar]

Re: Bios lenovo idepad 3 14igl NM-C961 rev 1.0

bios extracted from Lenovo website update for... V14-IGL, V15-IGL, ideapad 3-14IGL05, ideapad 3-15IGL05

DMI 483000 - 484FFF

Sir i try the bios but still no display. maybe this is not a bios issue. but all voltage are present

[elniñodelcautin]

Re: Bios lenovo idepad 3 14igl NM-C961 rev 1.0

Sir i try the bios but still no display. maybe this is not a bios issue. but all voltage are present

What voltage do you have on PL6601?

[Lhybz]

out of topic reply so i deleted it

[SMDFlea]

Re: Bios lenovo idepad 3 14igl NM-C961 rev 1.0
What voltage do you have on PL6601?

Hi, Got interested with your question, Im also working on the same model now. All power rails are okay before power on. But when I switched on the unit it just goes on without turning on the display. Upon switched on all signals to turn on the unit is okay. I was wodering about your question, what voltage should I get atn PL6601? If if there is no voltage at all, what do you think is the issue?

If you both want help with a hardware problem start a new thread in the laptop troubleshooting forum. This section is for "Bios requests ONLY!"

[Lhybz]

If you both want help with a hardware problem start a new thread in the laptop troubleshooting forum. This section is for "Bios requests ONLY!"

My apologies. I will delete my reply.

[haopermana]

hello could you help me fix my bios dump. no display and power button blink after i modify some bios settings. thanks

[SMDFlea]

RULES UPDATE for BIOS requests/offers AVOID BANNING, READ BEFORE POSTING
https://www.badcaps.net/forum/troubl...before-posting

You MUST:

• Provide the full machine model number, serial number (or Service tag, SNID) and the board model number (see https://www.badcaps.net/forum/showthread.php?t=88758 ) ,The serial number, make, full model number, motherboard model and revision (except QR codes) must be written/typed at your request as per the rules. Not as a picture, part of the file name and so on.

[peste]

hello could you help me fix my bios dump. no display and power button blink after i modify some bios settings. thanks

read..https://www.badcaps.net/forum/troubl...before-posting