Lenovo IdeaPad Flex 5 14ITL05 bios dump

[deweak]

Help me fix this bios. laptop doesn't read SSD.
code board LC56-14T 203013-1 448.0K119.0011
SN: R910FR5L
MTM: 82HS001VUS
UUID: 2E683C15-892F-EB11-924E-3C18A0141C84
Thanks in advance

[peste]

Please help me with this file
Turn on, no display.

S/N: P012W5LD
MTM: 82HS007CUS
MO:R9N0B1521010
MODEL : IdeaPad Flex 5 14ITL05

try post #127..

[gabrieljma1]

Please help me with this file
Turn on, no display.

S/N: P012W5LD
MTM: 82HS007CUS
MO:R9N0B1521010
MODEL : IdeaPad Flex 5 14ITL05

[shiyab]

Thanks bro

This file displays ok ...?

[Captemma]

IS GOOD FILE TRY

Thanks bro

[shiyab]

No display on HDMI
now it does not turn on
but 3.3v is active on the drain
just need a perfect bios for this

IS GOOD FILE TRY

[Captemma]

Is there any display via HDMI

No display on HDMI
now it does not turn on
but 3.3v is active on the drain
just need a perfect bios for this

[SMDFlea]

Not working

Is there any display via HDMI

[hoaca388]

You come here : https://www.badcaps.net/forum/troubl...mobile-devices

[Captemma]

Flex 5-14ITL05 Laptop (ideapad) - Type 82HS

Not working

[hoaca388]

PLEASE HELP ME FIX THIS
NO DISPLAY BUT TURN ON
SERIAL NO: R9120RRP
MODEL : Ideapad flex 5 14ITL05

Flex 5-14ITL05 Laptop (ideapad) - Type 82HS

[Captemma]

Re: Lenovo IdeaPad Flex 5 14ITL05 bios dump


Usung the programmer , read your bios chip for create a backup file , post this backup and serial number of device. We will repair your backup.

PLEASE HELP ME FIX THIS
NO DISPLAY BUT TURN ON
SERIAL NO: R9120RRP
MODEL : Ideapad flex 5 14ITL05

[peste]

Re: Lenovo IdeaPad Flex 5 14ITL05 bios dump

I'm looking for the IdeaPad Flex 5 14ITL05 bios
mainboard LC56-14T 203013-1 448.OK131.001
S/N R913BA9D
Original bios attached

try post #2..
https://www.badcaps.net/forum/troubl...hlight=14ITL05

[raf007]

Hello Sir, thanks FOR helping everyone.
I have LENOVO IdeaPad Flex 5 14ITL05
S/N: R9119SC
MO: R9N081120011
MTM: 82HS00ATMH

Many thanks in advance

[vatecnica]

According to what the client told me this pc was taken because it had no image but it turned on, they did the bios and there began the bsod, so they must have done the bios with one without knowing and touched too much, I could put the SN and the MTM on the machine with U1,,, I let me update the ME region but still has problems,,, when I connect with lenovo bridge I recognize another SN and not the one we put, I guess the default bios of this rom!

Translated with DeepL.com (free version)

[vatecnica]

Done i will post the image here! it set a lot of things!


i have mtm in the back on a sticker so i put that MTM is it ok?

[kalilinux25]

I already created the bootable usb and it asks me to enter the serial number, but I do not know what to put, because the one I put is written on a label outside and as colleague hoaca388 says is an example of factory, I am very new to lenovo especially with firmware and others! thank you very much colleagues!



EDIT: Diagnostic UEFI said Machine Type-Model (MTM): INVALID
Serial Number: INVALID too
INTEL ME VERSION: 15.0.49.2573 and EC1.26 but i cant program EC i dont have SVOD or another programmer!

https://github.com/ASparkOfFire/lenovo-u1-tool Just input your serial number that is printed on the back cover send the image here

[vatecnica]

I already created the bootable usb and it asks me to enter the serial number, but I do not know what to put, because the one I put is written on a label outside and as colleague hoaca388 says is an example of factory, I am very new to lenovo especially with firmware and others! thank you very much colleagues!



EDIT: Diagnostic UEFI said Machine Type-Model (MTM): INVALID
Serial Number: INVALID too
INTEL ME VERSION: 15.0.49.2573 and EC1.26 but i cant program EC i dont have SVOD or another programmer!

[kalilinux25]

I don't know that uonetool,,,,I consult you the bios I load it through the ch341 that is the one I have, but it was tool from where I download it? i have to install it in windows? read something? forgive my ignorance I am not long ago in the subject of pc and I lack much knowledge of software and firmware more than anything we repair hardware!

just flash the file using your ch341 then test if the laptop boots up then prepare a 8gb usb then download the software to your windows laptop to create a bootbale usb

[vatecnica]

I don't know that uonetool,,,,I consult you the bios I load it through the ch341 that is the one I have, but it was tool from where I download it? i have to install it in windows? read something? forgive my ignorance I am not long ago in the subject of pc and I lack much knowledge of software and firmware more than anything we repair hardware!