need bios GDC31 LA-K371P rev.3.0
Collapse
X
-
-
-
hello freind
after try about 20 dumps i had just one of them that turn on the computer but it s stuck on dell logoAttached Filesif you find these attachements useful please consider making a small donation to the site
Leave a comment:
-
Latitude 7420
Service Tag: 69DG3M3
Attached Filesif you find these attachements useful please consider making a small donation to the site
Leave a comment:
-
-
hello, my laptop get blink code: 3amber 6 white. Unfortunately I don't have the original bios file. Pls help me extract working bios from dell website, i have tried many files but it get same error or stuck in dell logo.
Dell latitude 7320
La-K371P rev 3.0
ST: 1SGR7G3
ThanksLeave a comment:
-
-
that s it thank you so much
Attached Filesif you find these attachements useful please consider making a small donation to the site
Leave a comment:
-
-
still need the working dump for that laptops plz brothers
GDC31 LA-K371P
REV: 3.0(A02) bin
ST 69DG3M3
BACKUP
thank you so much any wayLeave a comment:
-
-
-
-
Try with older version.need bios GDC31 LA-K371P rev.3.0
thank you so much for interessting but it does not turn on with this binAttached Filesif you find these attachements useful please consider making a small donation to the site
Leave a comment:
-
RULES UPDATE for BIOS requests/offers AVOID BANNING, READ BEFORE POSTING
https://www.badcaps.net/forum/troubl...before-posting
You MUST:- Provide the full machine model number, serial number (or Service tag, SNID) and the board model number (see https://www.badcaps.net/forum/showthread.php?t=88758 ) ,The serial number, make, full model number, motherboard model and revision (except QR codes) must be written/typed at your request as per the rules. Not as a picture, part of the file name and so on.
-
Please clean up my dump for me. Thank you Board number GDC31 LA-K371P REV 3.0, ST mixed up I have three of those that came in together. their original file did not spin the fan at all 20V 0.05 amps but some of the files from these post was giving them color bars on screen.Attached Filesif you find these attachements useful please consider making a small donation to the site
Leave a comment:
-
Try # 32 , if it not work , you has hardware isuess.need bios GDC31 LA-K371P rev.3.0
thank you so much for interessting but it does not turn on with this binLeave a comment:
Related Topics
Collapse
-
by macabookHello everyone,
I’m currently working on a dead MSI GP75 Leopard (MS-17E71) motherboard (i7 CPU, NVIDIA GPU) with a no display/no backlight issue initially. After extensive investigation, I’m at a critical stage involving EC firmware, BIOS/ME region interaction, and possible deep corruption. I'm seeking advanced insight from anyone with experience in EC/BIOS sync issues or PCH-level behavior. Here’s a full breakdown:
🧩 Initial Issue- Board powers on (fans spin, keyboard lights up and can be adjusted, caps lock led lights), but no display or backlight
- External display (HDMI) shows
-
Channel: BIOS Requests ONLY!
07-24-2025, 02:17 PM -
by cr4zychrissHello everyone,
I am requesting urgent assistance to unbrick my laptop, a rebranded TongFang GK7MRFR chassis. The laptop is completely dead following a faulty in-OS EC flash attempt.
I have successfully used a CH341A programmer and can read/write/verify both flash chips, but using my backups/extractions has failed to restore power. The root cause is likely a corrupted Intel Management Engine (ME) region or an incompatible EC/BIOS pairing. System & Hardware Details- Barebone / Chassis: TongFang GK7MRFR
- MB: MB: GK5MP5X V1.0 Prod :GK5MRFV10T04201310281
- Rebrand: PC Specialist
-
Channel: BIOS Requests ONLY!
-
by piratiHello everyone,
I recently bought a non-working Asus Zenbook Pro Duo OLED UX8402ZA that was listed for parts only. The seller mentioned that it had no display output but that the charging lights worked.
When the laptop arrived (without a charger and SSD), I connected a charger and confirmed with a multimeter that it was charging the battery. However, when I tried to power it on, only the backlight of the secondary display came on. There was no image, and it didn’t boot into the BIOS.
I decided to try flashing a new BIOS, but since I didn’t want to desolder...-
Channel: BIOS Requests ONLY!
-
-
by Vesko356First of all thanks to all of our members who have posted previously all methods posted here.
Please leave a comment if you find something new,or have anything else to add.
-----------------------------------------------------------------------------------------
Find by serial number,model number or series
If you know the laptop serial or model number go to HP support https://support.hp.com/us-en/drivers/laptops .
Enter the serial number or model number and click submit.On the next screen you will have to enter the OS
Operating system and OS version.If...-
Channel: BIOS Requests ONLY!
-
-
by jbonavitaHi, my laptop wont boot at all
With original bios no POST, only LED lights
With alternative BIOS from model TP500LN (flashed via programmer) the notebook works again
Some issues
A- with bios from 500LN, it won't update from bios of model 500LA (from 500LN v203 to 500LA v300)
B- If updated from 500LN version 203 to 300, the battery stops being recognized
Things I tried
1- Update / clear ME: Took the non working bios, made a backup, and did this: https://www.badcaps.net/forum/troubl...theory/trouble...-
Channel: BIOS Requests ONLY!
-
- Loading...
- No more items.
Leave a comment: