Provide the full machine model number, serial number (or Service tag, SNID) and the board model number (see https://www.badcaps.net/forum/showthread.php?t=88758 ) ,The serial number, make, full model number, motherboard model and revision (except QR codes) must be written/typed at your request as per the rules. Not as a picture, part of the file name and so on.
skazide on your bios the laptop does not turn on, the orange LED lights up when I press the power button, no picture, the fan does not spin. RJ_TECH on this BIOS, the laptop resets, the fan runs at maximum speed and there is no image
skazide on your bios the laptop does not turn on, the orange LED lights up when I press the power button, no picture, the fan does not spin. RJ_TECH on this BIOS, the laptop resets, the fan runs at maximum speed and there is no image
GDI4A LA-K032P Rev.1.0
Hello. Please help fix my BIOS. The laptop does not boot at all in these BIOS. After programming UC5 with Bios from post 87 laptop started up and showed the image but the text "Manufactured mode active" appeared and the fan was running at maximum speed.
BIOS in attachments is from my laptop. When I try to clean ME region from UC5 i have an error:
Error 9: Failed to decompose Image.
Error 42: Failed to open with processed commands.
Unable to open file: C:\Users\Karol\Desktop\Biosy robocze\Vostro 3400\Inspiron 3501 Service Tag_1XC9HJ3(1).bin. Reverting to default configuration.
Loading defaults.
Service tag I found in UC6 is: 5GNK6C3
try from post #85 that is a new bios problem should be resolve
Leave a comment: