need bios dump dell latitude 5420 (cpu 11th)

[SMDFlea]

You can view the product specs (laptop configuration) that the laptop shipped with at dell support. Enter the service tag at the support page,then look at the right side under "Quick Links" -> "View product specs"

[Markus1741]

Sorry that my BIOS doesn't start but I think it's because my BIOS is a Consumer LP and it should probably be a Corporate LP.
That won't fit.

[rjsoft9]

here try

Thank you for your reply & your valuable time but Same hang on Dell Logo

[rex98]

i tryed this (outimage # 107 ) with this file Laptop getting power on but hang on Dell Logo

here try

[rjsoft9]

Dell latitude 5420 i5 11th Gen Cpu MB GDF40 LA-K491P Rev:2.0 (A01)
Laptop not getting power on Bois IC Issu also Bois chip not detecting in programmer
new IC i tryed with some bin files which is available in badcaps but some file no display , no power on ,Hang on logo
the original dump is not availabe because of IC damage.

Can someone please help with working Bin file

i tryed this (outimage # 107 ) with this file Laptop getting power on but hang on Dell Logo

[rjsoft9]

Thank you for Reply

not getting power on with this file (Dell_5420_outimage_clean_no_password.zip)

[Markus1741]

Hello try this file with no Password ... Good luck ...

[rjsoft9]

ST : GC4F7T3

[SMDFlea]

Dell latitude 5420 i5 11th Gen Cpu MB GDF40 LA-K491P Rev:2.0 (A01)
Laptop not getting power on Bois IC Issu also Bois chip not detecting in programmer
new IC i tryed with some bin files which is available in badcaps but some file no display , no power on ,Hang on logo
the original dump is not availabe because of IC damage.

Can someone please help with working Bin file

Service tag ? https://www.badcaps.net/forum/troubl...before-posting

[rjsoft9]

Dell latitude 5420 i5 11th Gen Cpu MB GDF40 LA-K491P Rev:2.0 (A01)
Laptop not getting power on Bois IC Issu also Bois chip not detecting in programmer
new IC i tryed with some bin files which is available in badcaps but some file no display , no power on ,Hang on logo
the original dump is not availabe because of IC damage.

Can someone please help with working Bin file

[tarek gouadma]

Hi everyone. I have a Dell Latitude 5420. My problem is that it came with Absolute locked as enabled, could someone please remove it for me?

Details:
- Board: GDF40 LA-K491P Rev 2.0 (A01).
- BIOS chip: XMC 25RH256CXIQ.
- Service Tag: 4Q131F3.

Thank you very much!

Try this

[Markus1741]

Dell_latitude_5420_new_outimage.zip

Thanks. I loaded your clear file but still no image and no screen light. Can you help me rebuild my file. Thanks all !!!

Try this file ....

[thanhbeoit]

Thanks. I loaded your clear file but still no image and no screen light. Can you help me rebuild my file. Thanks all !!!

[farouk_1994]

Hello everyone. My Dell 5420 does not display the image. When I load a file on the forum, the screen only lights up and shows the image. Please help me. Main code" LA-K491p, ST: HSVK3F3.
Thank you

Try than replay

[thanhbeoit]

Hello everyone. My Dell 5420 does not display the image. When I load a file on the forum, the screen only lights up and shows the image. Please help me. Main code" LA-K491p, ST: HSVK3F3.
Thank you

[artemka06]

programmer Xgpro(Tl8662 plus)

flash was XMC 25RH256CXIQ
I Installed Winbond(W25Q256JVSIG)

Hi everyone. Are there any options?

[binhnguyen288]

Absolute removed.

Worked like a charm, thanks!

[hoaca388]

Hi everyone. I have a Dell Latitude 5420. My problem is that it came with Absolute locked as enabled, could someone please remove it for me?

Details:
- Board: GDF40 LA-K491P Rev 2.0 (A01).
- BIOS chip: XMC 25RH256CXIQ.
- Service Tag: 4Q131F3.

Thank you very much!

Absolute removed.

[binhnguyen288]

Hi everyone. I have a Dell Latitude 5420. My problem is that it came with Absolute locked as enabled, could someone please remove it for me?

Details:
- Board: GDF40 LA-K491P Rev 2.0 (A01).
- BIOS chip: XMC 25RH256CXIQ.
- Service Tag: 4Q131F3.

Thank you very much!

[artemka06]

The flash drive was not readable ? , what model is your programmer and software version, is the chip in the support list

programmer Xgpro(Tl8662 plus)

flash was XMC 25RH256CXIQ
I Installed Winbond(W25Q256JVSIG)