Microsoft Surface Pro 7 NEED BIOS. HELP!

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Prott
    replied
    Originally posted by Kabbutino
    The First problem i think was the bios because when i do hackintosh It Is fxked and i think if i find a new motherboard when all components works and the same for the bios i think tò do a swap but idk
    Did you try the bios from minhdigital​? That one is working for me. Also:
    - What programmer are you using?
    - Are you desoldering the bios chip or programming in place?
    - Did you first cleared the chip before programming and verified it afterwards?

    Leave a comment:


  • Kabbutino
    replied
    The First problem i think was the bios because when i do hackintosh It Is fxked and i think if i find a new motherboard when all components works and the same for the bios i think tò do a swap but idk

    Leave a comment:


  • Prott
    replied
    Hi, there can be multiple reasons why Surface won't boot. It can be any hardware fault preventing the Surface from finishing the power on sequence. Desoldering a CPU is the absolutely last resort when everything else fails (and is usually not even economical due to the cost of the CPU itself as well as the time spent on the exchange).

    I would suggest to:
    1. Check the resistance of all the coils - is there any that's low?
    2. Find the power on sequence in the schematics and measure all the signals in order to see where the sequence stops. Then you can narrow it down to a specific portion of the board that doesn't work.

    Hope that helps.

    Leave a comment:


  • Kabbutino
    replied
    Hi, Is possible do a CPU swap from a motherboard to another motherboard? Because my surface has the problem compare the logo for 3 seconds and shut down immediately and i change the bios chip but the bios won't boot. Any suggest? Plz Is very important to me this surface

    Leave a comment:


  • dutchgaucho
    replied
    Originally posted by minhdigital

    Send to you
    Awesome! You're the best. Working flawlessly. Thanks!

    Leave a comment:


  • minhdigital
    replied
    Originally posted by dutchgaucho
    Sorry for that. The serial number is 024073501453.
    Send to you
    Attached Files

    Leave a comment:


  • dutchgaucho
    replied
    Sorry for that. The serial number is 024073501453.

    Leave a comment:


  • SMDFlea
    commented on 's reply
    Serial number ? -> https://www.badcaps.net/forum/troubl...before-posting

  • dutchgaucho
    replied
    Hello there, I'm having a Surface Pro 7 that turns on for 4 seconds an then shuts down. I've tried Peste's BIOS (posted in #8) and it works but touch is not working and DMI data obviously does not match. Could somebody fix mine?
    Thanks!
    Attached Files

    Leave a comment:


  • Kabbutino
    replied
    Hi, i've got a problem with my surface pro 7, After i install hackintosh on It, my PC shows the Windows logo and immediately It turn off. How can i resolve this problem? In this Moment Is on a repair shop and they changed the chip of the bios but nothing It won't boot.

    Leave a comment:


  • Smeek
    replied
    Please can be clear the BIOS restriction of boot from USB and password for this Surface 7 pro 1866 ?
    SN: 066583701453​
    Attached Files

    Leave a comment:


  • Prott
    replied
    My apologies. Please help me fix this bios for Surface Pro 7 (ME error, can't boot from any drive / usb stick, sometimes doesn't boot at all). I can get into UEFI without problems, but it still does not want to boot past that no matter the settings.

    Model: 1866 (i5/8/128)
    SN: 049321294453
    Board revision: 2.0B

    Thank you.

    Leave a comment:


  • SMDFlea
    commented on 's reply
    RULES UPDATE for BIOS requests/offers AVOID BANNING, READ BEFORE POSTING
    https://www.badcaps.net/forum/troubl...before-posting

    You MUST:
    • Provide the full machine model number, serial number (or Service tag, SNID) and the board model number (see https://www.badcaps.net/forum/showthread.php?t=88758 ) ,The serial number, make, full model number, motherboard model and revision (except QR codes) must be written/typed at your request as per the rules. Not as a picture, part of the file name and so on.

  • Prott
    replied
    Hello,
    can somebody please help me with my Surface Pro 7 BIOS? It's having ME problems (bios showing ME version 0.0.0.0) + it is unable to boot from SSD or flashdrive (and sometimes it doesn't boot at all). Thank you SO much!

    PS: It is interesting that the working Rev 1 board BIOS that I have from a previous post is not working on the Rev 2 board.
    Attached Files

    Leave a comment:


  • ACHRAFJIRANI
    replied
    Originally posted by volinakis

    try
    thinks bro

    Leave a comment:


  • volinakis
    replied
    Originally posted by ACHRAFJIRANI
    can anyone clear the password for this Surface 7 pro 1866 please?
    SN:082637295253​
    [ATTACH]n3232921[/ATTACH]
    try
    Attached Files

    Leave a comment:


  • ACHRAFJIRANI
    replied
    can anyone clear the password for this Surface 7 pro 1866 please?
    SN:082637295253​
    1866.rar

    Leave a comment:


  • blcksmthprnt
    replied
    Originally posted by trepachka
    Hello, I have this Microsoft Surface 7 Pro that's stuck @ Windows logo. Could someone, please fix bios contents for it?

    Microsoft Surface 7 Pro 1866
    S/N 020671500753

    The original bios is attached. Thank you.
    try first 1. if it doesn't work try 2. if it doesn't work try 3. if it turns on then write and we'll think about what to do next
    Attached Files

    Leave a comment:


  • trepachka
    replied
    Hello, I have this Microsoft Surface 7 Pro that's stuck @ Windows logo. Could someone, please fix bios contents for it?

    Microsoft Surface 7 Pro 1866
    S/N 020671500753

    The original bios is attached. Thank you.
    Attached Files

    Leave a comment:


  • samstown
    replied
    Originally posted by minhdigital

    Thanks for sharing !!
    Nice one !

    Leave a comment:

Related Topics

Collapse

Working...