LENOVO BIOS AUTO-PATCHER for Supervisor Password Removal
Collapse
X
-
-
hi try
STEP 1: Flash LENOVO PATCHED.bin
STEP 2: Boot the machine
STEP 3: Press ENTER or F1 /etc. to enter BIOS settings
STEP 4: Enter any character when asked for Supervisor Password
STEP 5: Press enter when it shows Hardware ID
STEP 6: Press space bar 2x when asked
STEP 7: Turn off machine
STEP 8: Flash ORIGINAL.bin
STEP 9: Reset BIOS settings to factory defaultAttached FilesLast edited by shiyab; 12-11-2024, 12:10 AM.Comment
-
-
try STEP 1: Flash LENOVO PATCHED.bin
STEP 2: Boot the machine
STEP 3: Press ENTER or F1 /etc. to enter BIOS settings
STEP 4: Enter any character when asked for Supervisor Password
STEP 5: Press enter when it shows Hardware ID
STEP 6: Press space bar 2x when asked
STEP 7: Turn off machine
STEP 8: Flash LENOVO ORIGINAL.bin
STEP 9: Reset BIOS settings to factory defaultComment
-
i flashed the patched file.
i boot the machine
press enter
asking for supervisor pass
i enter any pass 3 times then it lock and shutdown
it didnt show hardware idComment
-
-
-
hI friends
i need password supervisor remove on this model
Lenovo P51S
20JY - s/n R9-0PWF6ZAttached FilesComment
-
Comment
-
-
Hello! Lenovo L570 Type 20J9-S0M500 S/N: MP-1CC79Q 17/11 has supervisor password and needs bios patched.
Thanks for your support!
READ L570.rarComment
-
Comment
-
Comment
-
Comment
-
Sounds like you will need to change the environment variables - https://discuss.python.org/t/python-installation/40571.Problem solved. Thanx!!!!
Comment
-
Comment