Thanks, wrote it but has the same behaviour like bios from post #2.
It starts, but when it tries loading OS freezes. Also in bios says KSCN22WW not KSCN43WW
Hello,
IdeaPad 1 15AMN7 - Type 82VF
SERIAL NO: MP2D8MEG TYPE 82VG006BRM
MB : HLS1C_HLS1D LA-L502P REV:1A
With original bios is not starting, with bios from post #2 , it starts but , but gets stuck when loading os, with bios from post #37 no image.
Here is the original bios:
Thanks!
...
Has admin/bios password. SIO is npcx997, but i don't have the tool to read it, only the 2 x 256 spi.
Is there any chance to unlock it without npcx997?
Thanks...
Starts with no password, but ssd is not detected and at asset info gives some wierd info .
LE: Looks like the ssd was broken, replaced it and works fine.
Thanks !
...
Hello,
I have a bios with password
Asus R1504ZA , SN: R8N0CV09R00232B , Board: x1404za r2.2
Bios chip looks to be faulty, i can only read it.
Replaced it, and tried few dumps, only dump from post #6 works but no ssd is detected.
Please help
Thanks!!!!...
Yes, but gives me same "Python not found" although it's installed. Tried also on another pc,reinstalled win 7 and 10, same error . Tried with differend python packages, same result....
Thank you, starts with backlight but no image, also 3 amber 6 white.
Thank you, starts, display logo, logo stays on, but nothing moves and 3 amber 6 white.
Posted a video earlyer but got deleted, probably broked some rules .
- Bios from rex98 starts , no image , and led flashes 3 amber 6 white.
- Bios from minhdigital starts,after 2min display starts and dell logo appears for half a second, then system restarts continiously without an ending. (flashed it few times same result)
Checked everything again,wrote each bin again and :
- original bios everything works fine, just has bios password so board is fine.
- Bios from minhdigital stays on ~10 sec , then boot loop 1 sec on 1 sec off .
- Bios from rex98 nothing happens, when i press power button i get amber light as long as the hold the button pressed. Charger does not switch from to 5 to 20....
Leave a comment: