hp 840 g6 6050A3022501-MB-A01

[SMDFlea]

Re: hp 840 g6 6050A3022501-MB-A01

unlock bios

You must post the laptop serial number.Read some of the previous posts in this thread,there is some HP unlocking software, use it,unlock it yourself !

RULES UPDATE for BIOS requests/offers *AVOID BANNING, READ BEFORE POSTING*
https://www.badcaps.net/forum/showthread.php?t=103570



.

[m0seba]

Hello, can anyone solve this problem? The old BIOS is dead. I need to merge the old file onto a file that works well

[SMDFlea]

RULES UPDATE for BIOS requests/offers AVOID BANNING, READ BEFORE POSTING
https://www.badcaps.net/forum/troubl...sting?t=103570

You MUST:

• Provide the full machine model number, serial number (or Service tag, SNID) and the board model number (see https://badcaps.net/forum/showthread.php?t=88758 )

[jackx]

plss fix this bios g6 just blinking
SERIAL 5CG949792H

[hoaca388]

????????????????????????

[Zoki55]

Hello to all I have hp 840 g6 6050A3022501-MB-A01, bios was password locked I already tried to reprogram bios chip with some bios that I found for this model, I'm a beginner trying to learn, but I messed up it must be something that I did wrong cose now every time when boot the nosy speaker loudly beep and a message appears Endpoint security controller problem and don't know how to remove that, this is beyond my comprehension please kind people any help would be appreciated thank you

here are my original bios files

SN# 5CG0310XMB

if i miss something please tell me

[Vesko356]

Hello to all I have hp 840 g6 6050A3022501-MB-A01, bios was password locked I already tried to reprogram bios chip with some bios that I found for this model, I'm a beginner trying to learn, but I messed up it must be something that I did wrong cose now every time when boot the nosy speaker loudly beep and a message appears Endpoint security controller problem and don't know how to remove that, this is beyond my comprehension please kind people any help would be appreciated thank you

here are my original bios files

SN# 5CG0310XMB

if i miss something please tell me

Flash 16MB chip with the attached below dump, program back 32MB with the original unmodified dump.
Memory chip must be erased before programing, use verification.
And next time ask first and then act, not the other way around.

[Zoki55]

I have followed your instruction, and it worked no more beep, thank you sir so much also will follow your advice in the future I will ask first, again thank you u for your help I do greatly appreciate

[Vesko356]

You're welcome

[KLINIK ELEKTRONIK]

Hello everyone, please repair my original bios

i have hp elitebook 840-G6
serial number :5CG9437H8
mainboard code :CRESCENT-6050A3022501-MB-A01

condition cant start .
i flash bios from this tread and another site, can start but have warning HP ENDPOINT SECURITY CONTROLLER PROBLEM and slow display.
please help to solve my problem.
thanks for support

i uploaded my original bios not start 👇

[SMDFlea]

Clean the ME firmware,that should fix it - https://www.badcaps.net/forum/troubl...=3#post1622422

[rex98]

Hello everyone, please repair my original bios

i have hp elitebook 840-G6
serial number :5CG9437H8
mainboard code :CRESCENT-6050A3022501-MB-A01

condition cant start .
i flash bios from this tread and another site, can start but have warning HP ENDPOINT SECURITY CONTROLLER PROBLEM and slow display.
please help to solve my problem.
thanks for support

i uploaded my original bios not start 👇

try. in first boot be patient.

[KLINIK ELEKTRONIK]

try. in first boot be patient.

same problem with HP ENDPOINT SECURITY

[rex98]

Flash this main. i check with me analyzer your ME region is Corrupt. i clearme your bin.

[KLINIK ELEKTRONIK]

Flash this main. i check with me analyzer your ME region is Corrupt. i clearme your bin.

sorry wrong

[KLINIK ELEKTRONIK]

Flash this main. i check with me analyzer your ME region is Corrupt. i clearme your bin.

hello rex98 thanks for help
i flash bios and your ec bios ,no luck same warning HP ENDPOINT SECURITY

[rex98]

hello rex98 thanks for help
i flash bios and your ec bios ,no luck same warning HP ENDPOINT SECURITY

flash this main U365 BB NOT START Clearme.rar (10.71 MB and also this EC fix.

[KLINIK ELEKTRONIK]

flash this main U365 BB NOT START Clearme.rar (10.71 MB and also this EC fix.

Hello rex98
thank you very much for your help
bios clear 365 and bios fix 366 work perfect, no warning and fast display

thankss

my question : how do you fix my bios ?

[KLINIK ELEKTRONIK]

Who needs it, please download it👇

[rex98]

Hello rex98
thank you very much for your help
bios clear 365 and bios fix 366 work perfect, no warning and fast display

thankss

my question : how do you fix my bios ?

i just clearme your main bios and fill with ff in hex editor the offset 00037000 to 00037588 in EC.

[KLINIK ELEKTRONIK]

i just clearme your main bios and fill with ff in hex editor the offset 00037000 to 00037588 in EC.

OK thank you bro,
do you have a tutorial fix bios on YouTube, the next day I can do it myself

[rex98]

OK thank you bro,
do you have a tutorial fix bios on YouTube, the next day I can do it myself

No i don't have I'm just a beginner and noob.

here's a guide its better than youtube https://www.badcaps.net/forum/troubl...cleaning-guide

[KLINIK ELEKTRONIK]

ok bro thanks for your help

[trunguntilyou]

help me!
840 g6 6050A3022501-MB-A01

The machine's rear cover cannot be seen, so other information cannot be provided

[SMDFlea]

You know the rules.................

RULES UPDATE for BIOS requests/offers AVOID BANNING, READ BEFORE POSTING
https://www.badcaps.net/forum/troubl...before-posting

You MUST:

• Provide the full machine model number, serial number (or Service tag, SNID) and the board model number (see https://www.badcaps.net/forum/showthread.php?t=88758 ) ,The serial number, make, full model number, motherboard model and revision (except QR codes) must be written/typed at your request as per the rules. Not as a picture, part of the file name and so on.

[trunguntilyou]

please help me!