hp pavilion x360 bios bin need

[Nurshad]

Re: hp pavilion x360 bios bin need

hp pavilion x360 m1-U001DX convertible pc bios

SR2KL

S/N-8CG61927TR

[Kiekko]

Re: hp pavilion x360 bios bin need

https://www.badcaps.net/forum/showpo...40&postcount=2

1.1.1.6. CH341A

Read the guide there: https://winraid.level1techs.com/t/gu...rammer/32948/3

If you have a black PCB, it is very likely that it needs to be modified for 3V operation instead of 5V. Failing to do so could damage the ROM IC.
Watch the instructions there:

https://www.youtube.com/watch?v=-ln3VIZKKaE
https://www.youtube.com/watch?v=HwnzzF645hA

Some other suggestions.

Try using a powered USB hub.
Choose the bios chip manually from the list,don`t use auto-detect.
If you have a PC install the CH341A on it and use the PC`s rear USB ports.
Try in USB 3 ports.
If you have a soldering iron do the 3V mod,and resolder all the pins on the CH341A ,the build quality on some is terrible.
Buy a better programmer,such as a TL866II
.

Is this ok to order? https://www.ebay.com/itm/37377718308...mis&media=COPY

[hardware1]

Re: hp pavilion x360 bios bin need

Helo masters,
please, need bios bin HP Pavilion x360
11-k145tu
14975-1
448.04A26.0011
blackscreen problems

Here's your new bios file, try it and give me the results.

[satriaevo]

Re: hp pavilion x360 bios bin need

Helo masters,
please, need bios bin HP Pavilion x360
11-k145tu
14975-1
448.04A26.0011
blackscreen problems

[SMDFlea]

Re: hp pavilion x360 bios bin need

That is not possible. I can not remove the chip from the motherboard. So let's try to solve the problem other way. Thank you. I am so newbie, so i am listening you what I have to do.

https://www.badcaps.net/forum/showpo...40&postcount=2

1.1.1.6. CH341A

Read the guide there: https://winraid.level1techs.com/t/gu...rammer/32948/3

If you have a black PCB, it is very likely that it needs to be modified for 3V operation instead of 5V. Failing to do so could damage the ROM IC.
Watch the instructions there:

https://www.youtube.com/watch?v=-ln3VIZKKaE
https://www.youtube.com/watch?v=HwnzzF645hA

Some other suggestions.

Try using a powered USB hub.
Choose the bios chip manually from the list,don`t use auto-detect.
If you have a PC install the CH341A on it and use the PC`s rear USB ports.
Try in USB 3 ports.
If you have a soldering iron do the 3V mod,and resolder all the pins on the CH341A ,the build quality on some is terrible.
Buy a better programmer,such as a TL866II
.

[Kiekko]

Re: hp pavilion x360 bios bin need

I find it very likely that you have to remove the chip from the motherboard and read it directly on your programmer.

That is not possible. I can not remove the chip from the motherboard. So let's try to solve the problem other way. Thank you. I am so newbie, so i am listening you what I have to do.

[hoaca388]

Re: hp pavilion x360 bios bin need

I find it very likely that you have to remove the chip from the motherboard and read it directly on your programmer.

[Kiekko]

Re: hp pavilion x360 bios bin need

Maybe it's the probe, try changing the driver program for CH341A eg ASprogrammer.

Do you mean, that new drivers to ASprogrammer? I use Neoprogrammer and ASprogrammer.

Do I have to remove all the drivers and reinstall other drivers where?

[hoaca388]

Re: hp pavilion x360 bios bin need

Maybe it's the probe, try changing the driver program for CH341A eg ASprogrammer.

[Kiekko]

Re: hp pavilion x360 bios bin need

None of the files are fine.

I really want to know what I am doing wrong. Can you know? I have taken pictures of my tools. How can I solve the reading problem?

[hoaca388]

Re: hp pavilion x360 bios bin need

None of the files are fine.

[Kiekko]

Re: hp pavilion x360 bios bin need

I am trying to figure out how to do this. Are my tools correct to read bios? I dont understand voltage at all. Do I have to do changes to CH341A tool? Or can I read bios not change to CH341A? How can I know the bios is read succesfully? I saw the picture above. Do I have to push the pogo pin adapter or not? I did push it. Are the last ones bins ok or not? Can someone take my hand and lead me to correct solution? Please.

[Kiekko]

Re: hp pavilion x360 bios bin need

I am trying. What about these bins?

[Kiekko]

Re: hp pavilion x360 bios bin need

Its different to the other,but it still has a repeating pattern of crap. Something isn`t right.Check all the connections and make sure youve got all pins lined up correctly.did you oslder wires or use a pogo pin adapter.Did you modify the CH341A for 3V voltage
.

I did not solder wires. I use this adapter. I did not modify voltage.

Is adapter ok? What about voltage?

[SMDFlea]

Re: hp pavilion x360 bios bin need

Here is new bin read from AsProgrammer. Working?

Its different to the other,but it still has a repeating pattern of crap. Something isn`t right.Check all the connections and make sure youve got all pins lined up correctly.did you oslder wires or use a pogo pin adapter.Did you modify the CH341A for 3V voltage
.

[Kiekko]

Re: hp pavilion x360 bios bin need

Here is new bin read from AsProgrammer. Working?

[Kiekko]

Re: hp pavilion x360 bios bin need

Its corrupt.Try reading it again,but this time try the CH341A with a USB powered hub,or plug the charger in before reading the chip

Is my chip however Winbond 25Q64FVIQ? I cannot find that from programmers.

Or is that W25Q64FV correct?

Do you mean, that i have to but the laptop charger in, before reading the chip?

[SMDFlea]

Re: hp pavilion x360 bios bin need

Ok.. Here is pictures. Are you sure? I have chosen W25Q64FV

My chip is:

Winbond 25Q64FV10

It says read success. ??

Its corrupt.Try reading it again,but this time try the CH341A with a USB powered hub,or plug the charger in before reading the chip

[Kiekko]

Re: hp pavilion x360 bios bin need

Not yet. One is that you have chosen the wrong chip, the other is that the programmer has read it unsuccessfully.

Ok.. Here is pictures. Are you sure? I have chosen W25Q64FV

My chip is:

Winbond 25Q64FV10
1533
6518
1R000

It says read success. ??

[hoaca388]

Re: hp pavilion x360 bios bin need

Hello. Finally i got it. Read success with NeoProgrammer. Can someone help please?

Not yet. One is that you have chosen the wrong chip, the other is that the programmer has read it unsuccessfully.