LCD LED EDID EEPRom Dumps

[pickledegg]

Wondering if anyone has a BOE NV156FHM-NY1 dump?

[mohammedsaid]

SAMSUNG Ltn156KT02 for hp 8560p test ok

[SMDFlea]

please need ltn156kt02 dump for 8560p

https://linux-hardware.org/?probe=e83d7e33f2&log=edid

SAMSUNG 156KT02-301

[mohammedsaid]

please need ltn156kt02 dump for 8560p

[SMDFlea]

Hi,I read it with some programmer,it says 512kb,don't known is it good,It's HP Spectre x360 Convertible Model 15-eb1043dx,Thank you.

It isn`t the EDID firmware,its for something else.

NE156QUM-N5G dump attached. The chip size should be 2-4KB ,it will be somewhere on the panels pcb ,not on the motherboard.Have you already checked the eDP cable

BOE0895 https://github.com/linuxhw/EDID/blob...5/438B1EDB04AF

[nikovmiroslav]

Post the corrupted dump. What model is the laptop its from.

Hi,I read it with some programmer,it says 512kb,don't known is it good,It's HP Spectre x360 Convertible Model 15-eb1043dx,Thank you.

[SMDFlea]

Hi,I need edid dump for BOE NE156QUM-N5G,it's UHD,mine is corrupted,with some other edid dump from BOE I get brightness but not picture,if anyone can help,Thank you very much.

Post the corrupted dump. What model is the laptop its from.

[nikovmiroslav]

Hi,I need edid dump for BOE NE156QUM-N5G,it's UHD,mine is corrupted,with some other edid dump from BOE I get brightness but not picture,if anyone can help,Thank you very much.

[ahkh_72]

Re: LCD LED EDID EEPRom Dumps

Hi
i need ltn156fl02-101 edid file????

this is ok

[remax2008]

Re: LCD LED EDID EEPRom Dumps

hello my friends . i have 15.6 inch screen ultra slim 40 pin
need edid eeprom for this type : MT156WHM-N10
THANKS IN ADVANCED

[AAAC]

Re: LCD LED EDID EEPRom Dumps

Try these links, the first link shows the EDID structure, the second link is an online EDID decoder and the last 2 links are utilities.

https://en.wikipedia.org/wiki/Extend...ification_Data
https://www.edidreader.com

https://www.nirsoft.net/utils/monitor_info_view.html
https://www.nirsoft.net/utils/dump_edid.html

[JoeTMACO]

Re: LCD LED EDID EEPRom Dumps

I have AUO G150XTN06.8, suppose to be 1024x768 resolution. The manual does not show the EDID data broken out

EDID reader software from INTEL shows only supported mode is 1920x1080

* Digital Display 2 *

Display Name: Built-In Display
Display Type: Digital
Serial Number: -
DDC2 Protocol: Supported
Gamma: 3.55
Connector Type: DisplayPort


Maximum Image Size
Horizontal - 0 inches
Vertical - 0 inches


Supported Modes
1920 x 1080 (60p Hz)


Power Management Support
Active Off Mode Supported


Raw EDID:
00 FF FF FF FF FF FF 00 36 7F 03 00 0F 00 00 00
00 0C 01 04 95 00 00 FF 2F 00 00 A0 57 49 9B 26
10 48 4F 00 00 00 01 01 01 01 01 01 01 01 01 01
01 01 01 01 01 01 02 3A 80 18 71 38 2D 40 58 2D
36 00 00 00 00 00 00 1E 00 00 00 FD 00 3C 3C AC
AC 0F 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 14

What bytes contain the supported display resolution(s) ?
I don't see a 0x780 for 1920 anywhere, so not sure how the EDID is encoded?

Why would manual say the resolution is 1024x768 and Intel reporting tool show supported display mode only is 1920 x 1080 60 Hz ?

Thanks

[SMDFlea]

Re: LCD LED EDID EEPRom Dumps

How can i make my own lcd/led cable for 30pin connector for programming
I need help pliz i don't no what to do

There is a link to a youtube video at post #6 that will help.

Edit: eDP cannot be read through a modified cable

[eric2022]

Re: LCD LED EDID EEPRom Dumps

How can i make my own lcd/led cable for 30pin connector for programming
I need help pliz i don't no what to do

[SMDFlea]

Re: LCD LED EDID EEPRom Dumps

Chi mei N154I1-L0B

[SMDFlea]

Re: LCD LED EDID EEPRom Dumps

EDID 30 PIN how can i programming eeprom ?

If the screen is eDP then you will have to desolder the chip or solder wires to it,and jumper the WP pin to ground. If its LVDS you can do the same or buy a dedicated programming cable or make your own,see post #6.You will also need a programmer.
.

[alaasniper3]

Re: LCD LED EDID EEPRom Dumps

EDID 30 PIN how can i programming eeprom ?

[Ghamidi]

Re: LCD LED EDID EEPRom Dumps

Attached is a dump from a lenovo W510 and a B156RW01 datasheet. The lenovo dump might be different to the standard one. You can make a standard dump from the datasheets EDID description on page 33 and 34. With a hex editor just type everything in the 2 green vertical columns into a new file.Copy the 128bytes FF`s from the end of the W510 dump or type all FF`s to make it up to 256bytes.

thank you so much Sir

[SMDFlea]

Re: LCD LED EDID EEPRom Dumps

Please need eeprom B156RW01 v1

Attached is a dump from a lenovo W510 and a B156RW01 datasheet. The lenovo dump might be different to the standard one. You can make a standard dump from the datasheets EDID description on page 33 and 34. With a hex editor just type everything in the 2 green vertical columns into a new file.Copy the 128bytes FF`s from the end of the W510 dump or type all FF`s to make it up to 256bytes.

EDIT:
https://linux-hardware.org/?probe=4b6be936e4&log=edid
https://github.com/linuxhw/EDID/blob...E/4AD0A1347398
.

[Ghamidi]

Re: LCD LED EDID EEPRom Dumps

Please need eeprom B156RW01 v1