Probook 470G3-Your system is not fully configured - contact your hp customer support

[oliviu50]

Re: Probook 470G3-Your system is not fully configured - contact your hp customer supp

"The last step is to lock the MPM back up. If you reboot now, you will lose everything that you accomplished.Run lockmpm.bat, which is also located in the WNDMIFIT folder."

Fill everything in if its not already there in the boxes, then run lockmpm.bat

Attached are photos with bios, all series are entered correctly. But I still have that warning message. What can it be?

[SMDFlea]

Re: Probook 470G3-Your system is not fully configured - contact your hp customer supp

It could be this..

[oliviu50]

Re: Probook 470G3-Your system is not fully configured - contact your hp customer supp

It could be this..

It finally resolved by running the sssm.bat file !! The message has disappeared. Thank you for your patience and help. Once again, thank you!

[appie1206]

Re: Probook 470G3-Your system is not fully configured - contact your hp customer supp

It could be this..

How can i run it in dos mode? wich commands must i use?

[dahnking]

Re: Probook 470G3-Your system is not fully configured - contact your hp customer supp

It could be this..

This one worked for me on