Probook 470G3-Your system is not fully configured - contact your hp customer support

[oliviu50]

Hello,

When turn on me laptop,appear for a few seconds "Your system is not fully configured - contact your hp customer support" . I mentioned that after that it entered smoothly in Windows 10. The motherboard was replaced with a new one in authorized service, all the series of devices were inserted correctly. Bios is up to date.
I have no other problem besides this warning.

Please help me to not have this warning, without having to send it back in service. It's an HP Probook 470 G3 laptop.

Thanks!

[mcplslg123]

Re: Probook 470G3-Your system is not fully configured - contact your hp customer supp

Can you enter bios setup?? If so, Is it showing model,serial etc correctly??To me seems like missing or incorrect dmi info in bios.It would have been better if posted old bios here

[oliviu50]

Can you enter bios setup?? If so, Is it showing model,serial etc correctly??To me seems like missing or incorrect dmi info in bios.It would have been better if posted old bios here

Yeah, I can get into bios. All series are entered correctly (S / N; system board id; SKU number; UUID etc). It's all right, except that start-up warning appears, disappearing in a few seconds.

[mcplslg123]

Re: Probook 470G3-Your system is not fully configured - contact your hp customer supp

Post your bios here without which no one can understand the problem.

[oliviu50]

Post your bios here without which no one can understand the problem.

N78_0123.bin

[SMDFlea]

Re: Probook 470G3-Your system is not fully configured - contact your hp customer supp

Download HP Bios Configuration Utility,run it and set an admin password .

http://ftp.hp.com/pub/caps-softpaq/cmit/HP_BCU.html

[oliviu50]

Re: Probook 470G3-Your system is not fully configured - contact your hp customer supp

Download HP Bios Configuration Utility,run it and set an admin password .

http://ftp.hp.com/pub/caps-softpaq/cmit/HP_BCU.html

Please, explain step by step how they can do this!
Thanks!

[SMDFlea]

Re: Probook 470G3-Your system is not fully configured - contact your hp customer supp

Please, explain step by step how they can do this!
Thanks!

[oliviu50]

Re: Probook 470G3-Your system is not fully configured - contact your hp customer supp

What link has the bios password with the warning message???

[Stevie2001]

Re: Probook 470G3-Your system is not fully configured - contact your hp customer supp

It means all manufacture info is missing including serial and modle number.

This will help you
https://youtu.be/9VKwnKrGsl8

[SMDFlea]

Re: Probook 470G3-Your system is not fully configured - contact your hp customer supp

It means all manufacture info is missing including serial and modle number.

This will help you
https://youtu.be/9VKwnKrGsl8

Post #3 He`s already got the serial etc .

[oliviu50]

Re: Probook 470G3-Your system is not fully configured - contact your hp customer supp

It means all manufacture info is missing including serial and modle number.

This will help you
https://youtu.be/9VKwnKrGsl8

All series are entered correctly. The only problem is the warning message that appears immediately after turning on the laptop, then disappears and goes into windows 10 without any problems.

[oliviu50]

Re: Probook 470G3-Your system is not fully configured - contact your hp customer supp

Post #3 He`s already got the serial etc .

Yes, all series are entered correctly. Why password setting is needed ???

Read to pag. 34.

[SMDFlea]

Re: Probook 470G3-Your system is not fully configured - contact your hp customer supp

What link has the bios password with the warning message???

What do you mean what link ? . Read the instructions, you have to run bios config utility from the command line.

Use the following sample command to create a setup
password on a system with no existing password:
BIOSConfigUtility.exe /nspwdfile:"new password.bin"

If you don`t know how to use the command line wait for some more suggestions from other members here or from the other places you`ve asked for help on, ******* ,vinafix, hp forums .

[oliviu50]

Re: Probook 470G3-Your system is not fully configured - contact your hp customer supp

What do you mean what link ? . Read the instructions, you have to run bios config utility from the command line.

Use the following sample command to create a setup
password on a system with no existing password:
BIOSConfigUtility.exe /nspwdfile:"new password.bin"

If you don`t know how to use the command line wait for some more suggestions from other members here or from the other places you`ve asked for help on, ******* ,vinafix, hp forums .

What is the reason for creating a password ??? This I do not understand!!
Please, read post #13

[SMDFlea]

Re: Probook 470G3-Your system is not fully configured - contact your hp customer supp

Sometimes the cofig file has to be changed, youve already got serial,uuid etc.It might not work anyway, wait for for other ideas or send it back to service.

[Stevie2001]

Re: Probook 470G3-Your system is not fully configured - contact your hp customer supp

Follow all instruction in video its not fixed cause you did not follow

[mcplslg123]

Re: Probook 470G3-Your system is not fully configured - contact your hp customer supp

N78_0123.bin

What you have posted is hp update file and not full bios backup. It should be 16mb file.

Have you tried updating bios from hp update?? I stiil beleive that there is some mismatch in the dmi info though it is just filled. Can confirm once you post your backup dump.

[oliviu50]

Re: Probook 470G3-Your system is not fully configured - contact your hp customer supp

What you have posted is hp update file and not full bios backup. It should be 16mb file.

Have you tried updating bios from hp update?? I stiil beleive that there is some mismatch in the dmi info though it is just filled. Can confirm once you post your backup dump.

Yes, I made a bios update to the latest version. Attached is the bios update. I do not know how to do to get a backup dump.

[SMDFlea]

Re: Probook 470G3-Your system is not fully configured - contact your hp customer supp

Yes, I made a bios update to the latest version. Attached is the bios update. I do not know how to do to get a backup dump.

You have the option to save the current bios to a file .

https://ftp.hp.com/pub/softpaq/sp845...00/sp84947.exe