HP elitebook 8470p dump urgent !!!

[Rhay]

Is it necessary to desolder the chip or can the chip inside in the laptop be read out like this?

post the original contents of the bios chip..

you need an SPI programmer...here is a video for example..https://www.youtube.com/watch?v=DWWi...nnel=ThisIsHow

[peste]

Is it necessary to desolder the chip or can the chip inside in the laptop be read out like this?

The bios chip must be unsoldered from the board before writing or reading..
do not use the clip, you may have errors..if you do not have anything to unsolder it with,
solder wires between the programmer and the bios chip..

[Rhay]

This is my Backup.
Can you reset the password?

[danito]

This is my Backup.
Can you reset the password?

sn?

[Rhay]

sn?

It's elitebook 8470p,
product number A1G60AV,
serial CNU3169ZDX,
motherboard model is HP 179B

[danito]

This is my Backup.
Can you reset the password?

try

[Rhay]

try

I'll try it tonight and give you feedback tomorrow, thank you in advance

It is possible to update the BIOS afterwards?

[danito]

I'll try it tonight and give you feedback tomorrow, thank you in advance

It is possible to update the BIOS afterwards?

Only remove pass

[Rhay]

Only remove pass

that i like to say is, the bios is still without password updateable?

[Rhay]

Only remove pass

it works, thank you.

BIOS Update fails. "HPQ Flash Wizard fails (RC=0xe)