ASUS UX582Z

[extrexxx]

HI i need clean me regio in this bios, i change the ec and i need autoprogram the ec i think this bios is good and only need clean ME region (i try clean it but some errors in V16 csme them i prefer if some guru here can clan whitout error) in anyway this bios not available here them maybe some person need and take it.
if some one can extract the EC region is good too
thx in advance
ASUS UX582Z
MOtherboard: UX582ZM REV 2.1
SERIAL: 36M N4N0CV11F83117F

[danito]

HI i need clean me regio in this bios, i change the ec and i need autoprogram the ec i think this bios is good and only need clean ME region (i try clean it but some errors in V16 csme them i prefer if some guru here can clan whitout error) in anyway this bios not available here them maybe some person need and take it.
if some one can extract the EC region is good too
thx in advance
ASUS UX582Z
MOtherboard: UX582ZM REV 2.1
SERIAL: 36M N4N0CV11F83117F

try

[extrexxx]

try

hi, thx in the first.
the board not turn on aut the the EC not program aut..
the ec is ITE5125VG 128 (128KB) your update is 256kb, them wrong
i have 3.3, 5, 1,8v... and the batery charge butnot led on the board (charge or power) them i think is the firmware in the ec...

[peste]

hi, thx in the first.
the board not turn on aut the the EC not program aut..
the ec is ITE5125VG 128 (128KB) your update is 256kb, them wrong
i have 3.3, 5, 1,8v... and the batery charge butnot led on the board (charge or power) them i think is the firmware in the ec...

you don't have to clear the "me region" of the main bios when you change the I/O chip, so that it writes itself..the I/O chip must be new, or empty, and have the same termination as the original chip..on most Asus models it writes itself..leave it longer..
check the solder joints on the I/O chip pins...next time you need something like this, write down the name and model of the I/O chip...
try this...extract from the main bios..