MSI CYBORG A13V BN: MS-15K11 Ver.1.0 Please check my BIOS attached

[Harryrepair]

Hello community,

I have this laptop coming up for 20 seconds without picture and switching off again.
Could this be a BIOS issue?

Sending you the original dump in attachment.

Thanks for any help

[peste]

Hello community,

I have this laptop coming up for 20 seconds without picture and switching off again.
Could this be a BIOS issue?

Sending you the original dump in attachment.

Thanks for any help

post S/N, full name and model, motherboard model, etc.

[Harryrepair]

post S/N, full name and model, motherboard model, etc.

MSI Cyborg 15 A13VE-1007-0015K1-1007
Boardnumber : MS-15K11 Ver.1.0
S/N : 0015K1-1007K2404000054

[peste]

MSI Cyborg 15 A13VE-1007-0015K1-1007
Boardnumber : MS-15K11 Ver.1.0
S/N : 0015K1-1007K2404000054

https://www.msi.com/Laptop/Cyborg-15...yborg-15-A13VE

[Harryrepair]

https://www.msi.com/Laptop/Cyborg-15...yborg-15-A13VE

Hello peste,
thank you for helping me out.
Can i extract/open the file with the ending .114 in HxD?

I have no idea how to transfer the BIOS to the chip?

[peste]

Hello peste,
thank you for helping me out.
Can i extract/open the file with the ending .114 in HxD?

I have no idea how to transfer the BIOS to the chip?

How (with what) did you read the bios chip on the laptop and post it here??

[Harryrepair]

How (with what) did you read the bios chip on the laptop and post it here??

i use TL866II with HxD and xgpro and finally was able to program the mentioned BIOS from msi website.
Now the device is switching on and stays on but still no picture or BIOS entering possible.

Any ideas at this stage?

Should this thread be redirected to troubleshoot instead BIOS request?

Kind Regards

[peste]

i use TL866II with HxD and xgpro and finally was able to program the mentioned BIOS from msi website.
Now the device is switching on and stays on but still no picture or BIOS entering possible.

Any ideas at this stage?

Should this thread be redirected to troubleshoot instead BIOS request?

Kind Regards

try writing the bios again..maybe you wrote it with errors..

The bios chip must be unsoldered from the board before writing or reading..
do not use the clip, you may have errors..if you do not have anything to unsolder it with,
solder wires between the programmer and the bios chip..

here is a video for example..https://www.youtube.com/watch?v=DWWi...nnel=ThisIsHow

[Harryrepair]

try writing the bios again..maybe you wrote it with errors..

The bios chip must be unsoldered from the board before writing or reading..
do not use the clip, you may have errors..if you do not have anything to unsolder it with,
solder wires between the programmer and the bios chip..

here is a video for example..https://www.youtube.com/watch?v=DWWi...nnel=ThisIsHow

Hello peste,

i cant believe the machine came up and i was able to install windows 10 but with some compatibility issues AND
WIN11 cannot be installed.
After some thoughts i came to the serial number inside the BIOS. Asking Powershell i get FFFFFF as serial number.
I think there are some adjustments needed in the hex file?

At the moment i am using the BIOS file loaded from msi. The original BIOS file was uploaded with this thread.

Kind Regards

[peste]

Hello peste,

i cant believe the machine came up and i was able to install windows 10 but with some compatibility issues AND
WIN11 cannot be installed.
After some thoughts i came to the serial number inside the BIOS. Asking Powershell i get FFFFFF as serial number.
I think there are some adjustments needed in the hex file?

At the moment i am using the BIOS file loaded from msi. The original BIOS file was uploaded with this thread.

Kind Regards

DMI+KEYWIN 10E0000 - 10E2FFF
the bios from post # 4is virgin, use the HxD program (it's free on the internet), enter both bios into the program (your laptop and the virgin one),
select that interval mentioned in both bios, copy the interval in your bios and pass it to the virgin bios (copy - paste)....and that's it...

[Harryrepair]

DMI+KEYWIN 10E0000 - 10E2FFF
the bios from post # 4is virgin, use the HxD program (it's free on the internet), enter both bios into the program (your laptop and the virgin one),
select that interval mentioned in both bios, copy the interval in your bios and pass it to the virgin bios (copy - paste)....and that's it...

I did it! Thank you so much! peste

[Harryrepair]

I did it! Thank you so much! peste

Coming back!

Whenever i let windows update all official updates which come with windows, there must be one update that crashes the BIOS.
The computer is like dead again. I am pretty sure, if i program the BIOS again, it will come up.

What to do?