I am new in this bios flashing and i need help how to do bios flash ,i have ch341a flasher and my bios chip is mxic mx2L12873F
my laptop SN is K2110N0169924
I am new in this bios flashing and i need help how to do bios flash ,i have ch341a flasher and my bios chip is mxic mx2L12873F
my laptop SN is K2110N0169924
do i need to read the old bios dump to successfully reflash the bios?
where can i find the new dump file to reflash the bios?
heres my old dump bios, did i save properly?
here my bios dump . my bios got corrupted when i flash vbios for the nvidia and i think it messed up with laptop bios
the bios posted is longer...
The bios chip must be unsoldered from the board before writing or reading..
do not use the clip, you may have errors..if you do not have anything to unsolder it with,
solder wires between the programmer and the bios chip..
I sent you a video above so you can see how it's done.
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
sorry for late reply heres my bios dump with chip unsoldered ,btw my chip is mxic25l12872f but my ch341a detected it as mxic25l12873f is that normal or i need different programmer for this chip? i already read and verify and theres error content disagreement
sorry for late reply heres my bios dump with chip unsoldered ,btw my chip is mxic25l12872f but my ch341a detected it as mxic25l12873f is that normal or i need different programmer for this chip? i already read and verify and theres error content disagreement
and this is longer...use the HxD program and check..
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
i try to create the bios dump again with neo programmer and it detect the correct chip ,and i tried verify after read it is success with no error . i tried create the dump 2 times and it was identical
so where should i find the correct bios to flash?
here the new bios dump
i try to create the bios dump again with neo programmer and it detect the correct chip ,and i tried verify after read it is success with no error . i tried create the dump 2 times and it was identical
so where should i find the correct bios to flash?
here the new bios dump
Comment