BIOS Unlock for HP zbook studio x360 g5

[Andrew Bower]

Hi,

I've been working on this for about a week. I've read the threads and ordered and attempted to use a programmer to pull the BIOS dump from the laptop with no luck. I tried using RcUnlocker, but keep getting a dll error even after reinstalling the C++ Redistributable. I also tried NeoUnlocker and another program. None would pull up the chip.

That leaves me asking for help unlocking this BIOS. The laptop boots up to the Domain login with no issue. I can pull up the boot menu. Any attempt to open the BIOS or the BIOS upgrade menu is met with a password request. Getting the password wrong three times just leaves me with a message to reboot the computer and I'm back to square one.

Model: HP Zbook Studio x360 G5
System BIOS: Q71 Ver 01.10.00
Serial Number: SCD9272118
SKU Number: 6FP02UT#ABA
System Board ID: 844F
System Board CT Number: PHVKK048JCH01P

Thanks in advance!

[peste]

Hi,

I've been working on this for about a week. I've read the threads and ordered and attempted to use a programmer to pull the BIOS dump from the laptop with no luck. I tried using RcUnlocker, but keep getting a dll error even after reinstalling the C++ Redistributable. I also tried NeoUnlocker and another program. None would pull up the chip.

That leaves me asking for help unlocking this BIOS. The laptop boots up to the Domain login with no issue. I can pull up the boot menu. Any attempt to open the BIOS or the BIOS upgrade menu is met with a password request. Getting the password wrong three times just leaves me with a message to reboot the computer and I'm back to square one.

Model: HP Zbook Studio x360 G5
System BIOS: Q71 Ver 01.10.00
Serial Number: SCD9272118
SKU Number: 6FP02UT#ABA
System Board ID: 844F
System Board CT Number: PHVKK048JCH01P

Thanks in advance!

remove the bios chip from the motherboard before reading or writing, or solder wires between the programmer and the chip.


you need an SPI programmer..here is a video as an example...https://www.youtube.com/watch?v=DWWigscuQDY

[Andrew Bower]

Took me a bit, but I finally figured out the problem with the 341 and it worked with no apparent problems. I managed to download the attached file.

Relevant PC info in the first post.

[Andrew Bower]

After posting, I examined the dump file i uploaded above and four more that i made with ASProgrammer. I also uploaded them to a couple online hex editors. They showed all RR's. All of the dumps passed verification with the same checksum. Is it possible that the bios has been cleared and simply needs a new bios version uploaded? The system is bootable and I am, in fact, installing Win 11 to it as i type this . . .

Could I just upload one of the other BIN files I've seen on the forum to it to unlock it?

[Andrew Bower]

Going through the few posts that have been made regarding this model. Here are the BIN files from the EC and TR Bios chips. I have tried them all on RCUnlocker and for these two files they say that they don't contain any information to unlock. The main BIOS file above got an error that it was the wrong size.

[Mddafia]

Zbook g15 studio workstation x360 i9,
Please i need bios file to processing the flash from a programmer
pc keep rebooting after boot logo HP show up
thanks

[lapfix]

Zbook g15 studio workstation x360 i9,
Please i need bios file to processing the flash from a programmer
pc keep rebooting after boot logo HP show up
thanks

Upload your bios file

post S/N, full name and model, motherboard model, product number,etc.

[Mddafia]

Hp zbook studio x360 g5
prodId: 5UC06EA#ABH
S/N: 5CD92348XY
Warranty: 3y3y0y
thanks

[peste]

Hp zbook studio x360 g5
prodId: 5UC06EA#ABH
S/N: 5CD92348XY
Warranty: 3y3y0y
thanks

you were asked to post the bios...

The bios chip must be unsoldered from the board before writing or reading..
do not use the clip, you may have errors..if you do not have anything to unsolder it with,
solder wires between the programmer and the bios chip..

you need an SPI programmer...here is a video for example..https://www.youtube.com/watch?v=DWWi...nnel=ThisIsHow

[Mddafia]

you were asked to post the bios...

The bios chip must be unsoldered from the board before writing or reading..
do not use the clip, you may have errors..if you do not have anything to unsolder it with,
solder wires between the programmer and the bios chip..

you need an SPI programmer...here is a video for example..https://www.youtube.com/watch?v=DWWi...nnel=ThisIsHow

Yes, it already unsoldered, in the motherboard two chip one wroted (TR BIOS), and the second(BIOS).
I need the bios files to write them by using the spi programmer.

[Mddafia]

you were asked to post the bios...

The bios chip must be unsoldered from the board before writing or reading..
do not use the clip, you may have errors..if you do not have anything to unsolder it with,
solder wires between the programmer and the bios chip..

you need an SPI programmer...here is a video for example..https://www.youtube.com/watch?v=DWWi...nnel=ThisIsHow

Problem is fixed, thank you
I use this bios, and it worked, thanks