HP HP MT45 Mobile Thin Client Endpoint Security Controller Problem

[biednybelfer]

After removing the password I get an error "There is a problem with hp endpoint security controller on the unit". I read that I need a modified BIOS. There are 3 ISP on my board.
Mainbard model:6050A3044201-MB-A01 (A1)
Serial Number: 5CG0275ZLV
(I'm not allowed to upload files with the extension bin, so I upload zip)

[Stefan Steff]

Try this file.
DMI data must be rewrited with BCU Tool

Description: HP mt45 Mobile Thin Client
Serial Number: 5CG0275ZLV
Product Number: 3JH18EA#ABB
Board CT Number: PJBLR00WBDX0I3
BuildId(BID): 19WWMTBN601#SABB#DABB
Feature Byte: 476b7M7Q7W7s9AaBacapaqawb8cAdRdUdqhkjAjQjS.e8
MAC Address: 84-2A-FD-51-E9-B4

P.S.
I'm not sure if you removed the password correctly...

[biednybelfer]

I'm not sure if you removed the password correctly...

I forgot that the dump has my password.
The laptop starts up without errors. Thank you very much!

[Stefan Steff]

You're welcome!
Glad to hear that it's working.

[Samy33]

Hello

Could you please provide me with my DMI?
Is it possible to use the HP DMI Tool software?
Thank you

[Stefan Steff]

Hello

Could you please provide me with my DMI?
Is it possible to use the HP DMI Tool software?
Thank you

This is your requested info:

Description: HP ProBook 450 15.6 inch G9 Notebook PC
Serial Number: 5CD3091R26
Product Number: 6Q974ES#ABF
Board CT Number: PPQMP058JHQ1UI
BuildId(BID): 22WWRTCT601#SABF#DABF
Feature Byte: 476J6S6b7B7J7M7Q7W7saBaQapaqauawbUbhcAdpdqeTfPguk8mEn7nVpTpqqjqzr2r3.EA
MAC Address: 7C-4D-8F-A0-64-CA

If you refer to HP BCU Tool as HP DMI software, then yes you must copy every data to the corresponding line in config.txt.
But first you must enter the machine in MPM mode (Manufacturing Program Mode).

[Samy33]

This is your requested info:

Description: HP ProBook 450 15.6 inch G9 Notebook PC
Serial Number: 5CD3091R26
Product Number: 6Q974ES#ABF
Board CT Number: PPQMP058JHQ1UI
BuildId(BID): 22WWRTCT601#SABF#DABF
Feature Byte: 476J6S6b7B7J7M7Q7W7saBaQapaqauawbUbhcAdpdqeTfPguk8mEn7nVpTpqqjqzr2r3.EA
MAC Address: 7C-4D-8F-A0-64-CA

If you refer to HP BCU Tool as HP DMI software, then yes you must copy every data to the corresponding line in config.txt.
But first you must enter the machine in MPM mode (Manufacturing Program Mode).

Thanks for the DMI.

Where can I find the HP BCU software and how do I use it? Thanks again.

[Stefan Steff]

Thanks for the DMI.

Where can I find the HP BCU software and how do I use it? Thanks again.

Here is the HP BIOS Configuration Utility (BCU) tool. On Youtube you will find plenty examples how to use:

https://ftp.hp.com/pub/softpaq/sp107...0/sp107705.exe

[Samy33]

Here is the HP BIOS Configuration Utility (BCU) tool. On Youtube you will find plenty examples how to use:

https://ftp.hp.com/pub/softpaq/sp107...0/sp107705.exe

Thanks you

[Stefan Steff]

You're welcome !

[Samy33]

You're welcome !

Hello,

I'm copying BCU data, but the system is asking for the SMBIOS UUID, function byte, and SKU.

When I enter the full function byte line provided above by Stefan Steff, the computer displays an error.

I don't have the SMBIOS UUID or SKU. Where can I find them? Thank you.

[Samy33]

I successfully retrieved the Function byte and the SKU number.

I can't find the SMBIOS UUID number; perhaps it's not required?

Thanks in advance.