Lenovo Legion 5 15IAH7 / 5 Pro -16IAH7 - NM-E241 Rev 1.0 - BIOS fix needed

[peste]

ite8227e-256.

I have a programmer SUCCESSOR50+ite lite board. https://www.vss.store/magazin/produc...or-successor50
Technically I can flash this chip. I need only work dump.

This is an excerpt from the bios you posted..

[BoBppy]

Try

How did you do it, I need similar help in the same way, thanks!
My machine is also 16IAH7H 82RF, MTM 82RF0000CD,SN PF3SFP32
Here are my files for the bios backup that won't boot due to modifying the Gear Ratio to 1 and the official website's bios that has no DMI information, respectively

[SMDFlea]

How did you do it, I need similar help in the same way, thanks!
My machine is also 16IAH7H 82RF, MTM 82RF0000CD,SN PF3SFP32
Here are my files for the bios backup that won't boot due to modifying the Gear Ratio to 1 and the official website's bios that has no DMI information, respectively

Please attach files directly to your post in a zip or rar

[BoBppy]

Please attach files directly to your post in a zip or rar

I've done it. I found the two segments beginning with LENV and they are the second Padding partition shown in the UEFITool. Then I copied and pasted twice as many FF0h bytes of data through 010editor and all the DMIs were restored (this doesn't work in UEFITool by exporting the Padding directly and then importing it).