HP Elite x360 1040 G9 2-in-1 BIOS password

[JustAimz]

Hi! I have an HP Elite x360 1040 G9 2-in-1 with locked BIOS. I read main BIOS from chip and I will attach it here. Hope someone can help me.

SN: 5CG2364R32
ProdID: 4C049AV

I tried unlocking with RCUnlocker but is not supported.. And I am too new to this to try it myself...

[qayyum786]

At 1st boot press F10 and RESET BIOS to factory defaults, save, restart and password will go on.

[JustAimz]

At 1st boot press F10 and RESET BIOS to factory defaults, save, restart and password will go on.

First I want to thank you for your time but I wasn't successful and I will describe below why.

So.. For anyone who want to try to repair a PC/Laptop I would like to offer you some of my mistake's knowledge... If you use CH341A to program chips it will not work with 256mbit (32MB files) because idk, it is what it is
If you want to program something more than 128mbit (16MB files) you need to use something like RT809F or like I discovered later a Raspberry Pi (Best option in my opinion, and like VERY FAST)...

I advise all of you to check your programmer data sheet before trying what I have done.. Unfortunately the laptop isn't still in my possession so I cannot fix it anymore.

[CammyTier1]

First I want to thank you for your time but I wasn't successful and I will describe below why.

So.. For anyone who want to try to repair a PC/Laptop I would like to offer you some of my mistake's knowledge... If you use CH341A to program chips it will not work with 256mbit (32MB files) because idk, it is what it is
If you want to program something more than 128mbit (16MB files) you need to use something like RT809F or like I discovered later a Raspberry Pi (Best option in my opinion, and like VERY FAST)...

I advise all of you to check your programmer data sheet before trying what I have done.. Unfortunately the laptop isn't still in my possession so I cannot fix it anymore.

CH341A is fine just use a third party software and make sure if u have the older one to do the volt mod on it

[JustAimz]

CH341A is fine just use a third party software and make sure if u have the older one to do the volt mod on it

I have the black (old) one modded. I tried software that has the cip in DB and it does not work...

Edit: To be more clear I can only read those chips

[keczuk]

Please remove bios pass HP 1030 G9.

SerialNumber:5CG3021WGG
ProductConfigurationID:6W5Y3UC#ABA
Board CT Number:PMYEK00WBHL0YR
Name:HP EliteBook x360
ProductName:HP Elite x360 830 13 inch G9 2-in-1 Notebook PC

[SMDFlea]

Please remove bios pass HP 1030 G9.

SerialNumber:5CG3021WGG
ProductConfigurationID:6W5Y3UC#ABA
Board CT Number:PMYEK00WBHL0YR
Name:HP EliteBook x360
ProductName:HP Elite x360 830 13 inch G9 2-in-1 Notebook PC

This thread topic is for the 1040 G9 . You have posted about 2 different models 1030 G9 and 830 13 inch G9 .Whatever it is,if it`s not a 1040 G9 then you are off topic.