HP 17 DAY11AMB6E0 revE repair request

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • baddjavo
    Senior Member
    • Jun 2018
    • 87
    • Serbia
    #1

    HP 17 DAY11AMB6E0 revE repair request

    I found that 19v pins of flat cable was broken, so i connected with wire, but still nothing. cn2 pins1,2. Display now have 19v.

    U2, L8 no stuff, so pin1 float. pin3=3.3v, pin4,5=3.3v
    resistance on cn2, pin4=100k, pin5=82k, pin40=9k
    Voltage not coming on cn2 pin40,4, before bios change.
    My bios backup is attached
    Attached Files
    Tags: None
    • baddjavo
      Senior Member
      • Jun 2018
      • 87
      • Serbia
      #2
      Re: HP 17 DAY11AMB6E0 revE repair request

      Need bios for lvds version, cant find model name faded.

        Comment

        Previous template Next

        Related Topics

        Collapse
        • dexxter_sat
          A battle between DAY11AMB6E0 revE and a newbie
          by dexxter_sat
          My first repair try...

          Hp pavilion 15, no light, not charging.

          BQ24738H:

          1. 0,8v
          2. 0,8v
          3. 0,8v
          4. 0,8v
          5. 3,0v
          6. 14,0v
          7. 0,33v
          8. 0,47v
          9. 0,47v
          10. 0,14v
          11. 2,1v
          12. 1,1v
          13. 1,1v
          14. 0
          15. 0
          16. 6v
          17. 6v
          18. 1,1v
          19. 1,1v
          20. 19v

          When i bypass P020 mosfet, laptop works but neither charging nor using battery. Any hints?

          [Mod. Edit] Schematic -> https://www.badcaps.net/forum/show...
          10-20-2023, 03:48 PM
        • baddjavo
          HP 17 DAY11AMB6E0 revE problem
          by baddjavo
          Yesterday i got hp 17inch laptop, no power wont start. Dead.

          After pressing pwrbtn 3x blinks white led on dc connector.

          No 3.3v, no 5v because nothing on enable pin 1.
          s5_on signal missing.

          LDO 3.3v on pin 5 and LDO 5v on pin 7 outputs are good.

          pwrbtn 3.3v good.

          s5_on signal missing.

          schematics and screenshots attached....
          03-21-2023, 08:00 AM
        • Loki_Fido
          BIOS request for HP ENVY x360 2 in 1 Laptop 13-bf0002TU PLEASE
          by Loki_Fido
          Hi ya folks,
          Hope everyone's having a good day.

          I have a HP ENVY x360 2 in 1 Laptop 13-bf0002TU with nothing on the screen.
          The laptop starts but no display. Connecting to an external monitor give me nothing too. Ive attached my original backup bios

          Make HP ENVY x360 2 in 1
          Model 13-bf0002TU
          S/N CND3171C5T
          Prod ID 6L2F0PA#ABJ

          I looked up at this site before writing this request. And there was a link. But i couldn't download any files from it.
          Any moderator could look it up, if possible? It says, "Invalid file...
          06-16-2025, 08:02 PM
        • mindoverflow
          ASUS GTX 1650 Gpu.Initialize Interrupt request line stuck asserted
          by mindoverflow
          hello,

          there is an asus gtx1650 which displays fine in windows but if i run a benchmark test it displays artifacts and the driver crashes after a second or two.

          I changed pads and thermal paste.

          I run mats test but it is reporting 0 errors.

          I then tried to run the mods version 400.271_1650 test, it first ran and stopped with a 'breakpoints limit reached after 5 retries' error and the fans went full speed.

          After a reboot, I tried to run the test again, but now the test fails and says "ERROR: Couldn't clear GPU's interrupt...
          02-09-2022, 03:22 PM
        • ebyte64
          Bios request for Acer P214-52-58CH
          by ebyte64
          Good day.

          I would like to request a bios for the following laptop?

          Model: Acer P214-52-58CH
          Model No: N19Q7
          S/N: NXVLHE0H11204BA27600
          SNID: 11201936276

          Symptoms: Laptop powers on but no picture on screen.

          I have already checked voltages and all is present. I have checked resistance on the coils to see if the chipset or cpu might be shorted. All resistances look normal. I have tried diffrent ram and I have reset the bios. I have also visually inspected the board to see if anything is burnt or if there are any traces of liquid...
          09-25-2024, 05:59 AM
        • Loading...
        • No more items.
        Working...