Hello!
Just arrived an old Aspire 5920G showing just a black screen.
When I push the power button:
- turn on, fan spin up for 2 seconds, shutdown
- turn on, fan spin up for 2 seconds, shutdown
- turn on, fan spin up for 2 seconds, shutdown
- turn on, fan spin up for 2 seconds, shutdown
- turn on, fan spin up for 2 seconds, shutdown
- turn on, fan spin up for 2 seconds, fan spin off but the M/B keep turned on
VGA is an 8600M GS (MXM)
Reset CMOS, changed RAM and plugged VGA & HDMI cable to external display: no signal.
I've also tried another MXM card found in my drawer, same behaviour...
Weird thing: caps lock seem to work.
3.3V, 5V and 1.8V rails are ok
Each time M/B is turned on, VCC_CORE measure 0.9V for 2s, then 1.2V and almost instantly falls to 0.
Just arrived an old Aspire 5920G showing just a black screen.
When I push the power button:
- turn on, fan spin up for 2 seconds, shutdown
- turn on, fan spin up for 2 seconds, shutdown
- turn on, fan spin up for 2 seconds, shutdown
- turn on, fan spin up for 2 seconds, shutdown
- turn on, fan spin up for 2 seconds, shutdown
- turn on, fan spin up for 2 seconds, fan spin off but the M/B keep turned on
VGA is an 8600M GS (MXM)
Reset CMOS, changed RAM and plugged VGA & HDMI cable to external display: no signal.
I've also tried another MXM card found in my drawer, same behaviour...
Weird thing: caps lock seem to work.
3.3V, 5V and 1.8V rails are ok
Each time M/B is turned on, VCC_CORE measure 0.9V for 2s, then 1.2V and almost instantly falls to 0.
Comment