After solving the lack of 19v alw, I noticed a short on the 1.2v ddr4 line, I replaced the ic and the two mosfets (they were both shorted), however I still detect a short on this line on the cpu side. Then
I removed the inductance of this line. Now the behavior is the following: the card does not start, if I press the power button, the system goes on for a short time and then off. The system even with the CPU shorted regarding the 1.2v ddr4 shouldn't boot anyway?
I removed the inductance of this line. Now the behavior is the following: the card does not start, if I press the power button, the system goes on for a short time and then off. The system even with the CPU shorted regarding the 1.2v ddr4 shouldn't boot anyway?
Comment