Announcement

Collapse
No announcement yet.

Lenovo Thinkpad T540P/T440P - Power Cycles ? (NM-A131)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Lenovo Thinkpad T540P/T440P - Power Cycles ? (NM-A131)

    Hello to all,

    Laptop that was turning on ,after liquid damage into the keyboard section, cleaned the traces chips etc. without any problem, it started again , swapped keyboard, all went fine.

    It had SVP password, so i tried to autopatch the tool, to remove the password and started power cycle.
    I had backed up the original bios dump ,and restored it on it. but now it refused to turn on.

    You see power light, fan spin , and as soon as it spins, it shuts and restarts again.

    Don't know where to start checking...

    #2
    Re: Lenovo Thinkpad T540P/T440P - Power Cycles ? (NM-A131)

    The good thing is that for the particular laptop i have , x4 motherboard donor. So i may be able to repair it.
    If i can figure what is wrong with it.
    Where should i start ?

    Comment


      #3
      Re: Lenovo Thinkpad T540P/T440P - Power Cycles ? (NM-A131)

      is there a tamper switch
      All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

      Comment


        #4
        Re: Lenovo Thinkpad T540P/T440P - Power Cycles ? (NM-A131)

        Originally posted by SMDFlea View Post
        is there a tamper switch
        Yes, i have |stick| it , and it's closed just to be sure.

        Here is a video
        https://streamable.com/a7nle4

        Comment


          #5
          Re: Lenovo Thinkpad T540P/T440P - Power Cycles ? (NM-A131)

          Post your original password locked bios backup in the bios requests section
          All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

          Comment


            #6
            Re: Lenovo Thinkpad T540P/T440P - Power Cycles ? (NM-A131)

            sorry i got the wrong thread, it was for this one
            https://www.badcaps.net/forum/showth...85#post1161385
            Last edited by Maxpower3; 09-05-2022, 10:31 AM.

            Comment

            Working...
            X