Hello there. HP 15-db0008nv, motherboard LA-G076P, had water damage.
GL850S is shorted and removed. It's only for card reader, all 3 USB are working ok.
SY8286BRAC was shorted and replaced (it's for creating +3VALWP and +3VALW LDO) and it's working ok.
Now laptop is working but it cannot see the M2 drive, not even in bios:
If i put the disk in a m2 to usb adapter, disk can be seen, so disk is ok.
If i put another M2 disk in the specific laptop, it boots ok, so disk slot is ok.
Disk interface has key B+M, both disks are M2 Sata 3 interface.
Can anyone solve this riddle? Thanks.
GL850S is shorted and removed. It's only for card reader, all 3 USB are working ok.
SY8286BRAC was shorted and replaced (it's for creating +3VALWP and +3VALW LDO) and it's working ok.
Now laptop is working but it cannot see the M2 drive, not even in bios:
If i put the disk in a m2 to usb adapter, disk can be seen, so disk is ok.
If i put another M2 disk in the specific laptop, it boots ok, so disk slot is ok.
Disk interface has key B+M, both disks are M2 Sata 3 interface.
Can anyone solve this riddle? Thanks.
Comment