acer V5WE2 LA-9531P

[pippo_one]

Dear All
I have an acer E1-572G with mainb V5WE2 LA-9531P
the integrated video card after installing the drivers makes the notebook fizzy and I have to turn it off.
in this mainboard
I can eliminate the video card (not power it) and use the processor one ... someone gives me a hand
Thank you

[mon2]

Re: acer V5WE2 LA-9531P

You should boot your computer in Windows SAFE MODE and go to your desktop. Then uninstall the bad video device driver or change the screen resolution / refresh rate that is causing the screen to go fuzzy.

[pippo_one]

Re: acer V5WE2 LA-9531P

let me explain better, I would like to disable the video chip from the motherboard and use the Intel processor one ... I seem to have read somewhere that it is possible on some motherboards, just unsolder two jumpers and drive the video signal from the processor .. .I would need help locating the two jumpers from someone more experienced than me

[pippo_one]

Re: acer V5WE2 LA-9531P

opss : not fizzy or fuzzy ...but the screen freezes

[mon2]

Re: acer V5WE2 LA-9531P

https://youtu.be/rkRk2e3Pfns

[pippo_one]

Re: acer V5WE2 LA-9531P

Thank you very much for for information , the last step are new bios e kbc ... someone help me? (which bios)
I have an EZP2019 programmer .. as a first step I unsolder the bios-chip and reprogram it with the new bios ... but how can I program the kbc ... someone explain the procedure to me? thank you

[SMDFlea]

Re: acer V5WE2 LA-9531P

let me explain better, I would like to disable the video chip from the motherboard and use the Intel processor one ... I seem to have read somewhere that it is possible on some motherboards, just unsolder two jumpers and drive the video signal from the processor .. .I would need help locating the two jumpers from someone more experienced than me

To flash the EC you would need a special programmer,these are the Vertyanov JIG,SVOD3/4 ,SAS,RT809H .You will not be able to program it with the EZP2019
.