I recovered bricked 5330m by means of https://www.badcaps.net/forum/showpo...04&postcount=4
Then filled in missing system parameters using NBDMIFIT (v2.13 iirc)
But can't work out how to stop "ME is in Recovery State..." on every boot
Hoping some of the dross from Googling was worthwhile, I subsequently updated BIOS to latest version F.66 rev.A under DOS, and updated ME under Win10 CLI (wouldn't work under DOS) using commands extracted from SP80144.exe
FWIW, ME update's "FWUpdLcl.exe -f /ME/ME7_5M_UPD_Production.bin -allowsv -y" didn't show any errors
It's not a show-stopper, just something I'd like to fix
Then filled in missing system parameters using NBDMIFIT (v2.13 iirc)
But can't work out how to stop "ME is in Recovery State..." on every boot
Hoping some of the dross from Googling was worthwhile, I subsequently updated BIOS to latest version F.66 rev.A under DOS, and updated ME under Win10 CLI (wouldn't work under DOS) using commands extracted from SP80144.exe
FWIW, ME update's "FWUpdLcl.exe -f /ME/ME7_5M_UPD_Production.bin -allowsv -y" didn't show any errors
It's not a show-stopper, just something I'd like to fix
Comment