Re: Unable to Locate Power Supply Chip on HP Elitebook 840 G3
ok. I desolder the BIOS chip and noticed that the contact under the chip (wson pin layout) was damaged during the initial unlocking of the bios. It seemed ok when I solder it back. Is there a way to convert the pin layout of the motherboard bios from wson to isoc and use an equibalent isoc bios chip with same storage? can I just use an isoc type of bios dump the bios file and solder on the board?
ok. I desolder the BIOS chip and noticed that the contact under the chip (wson pin layout) was damaged during the initial unlocking of the bios. It seemed ok when I solder it back. Is there a way to convert the pin layout of the motherboard bios from wson to isoc and use an equibalent isoc bios chip with same storage? can I just use an isoc type of bios dump the bios file and solder on the board?
Comment