Acer Aspire V3-771 G
VA70 / VG70 rev 2.1
After connecting the power supply, the board itself trampled from about 300-400mA, the PCH bridge core reached about 50C at that time, I replaced the bridge with another used one, but the board still reacts similarly, I did not notice that the PCH bridge core was heating up.
After connecting, it starts up by itself with a consumption of about 300mA, the switch diode and the powe diode on the board turn on and off, the LED diodes in the RJ45 socket turn on and off.
The voltage of 3V and 5V drops during the retart, or rather it should be all the time.
After about 2 minutes of such reboots, the GPU core is around 50C
VA70 / VG70 rev 2.1
After connecting the power supply, the board itself trampled from about 300-400mA, the PCH bridge core reached about 50C at that time, I replaced the bridge with another used one, but the board still reacts similarly, I did not notice that the PCH bridge core was heating up.
After connecting, it starts up by itself with a consumption of about 300mA, the switch diode and the powe diode on the board turn on and off, the LED diodes in the RJ45 socket turn on and off.
The voltage of 3V and 5V drops during the retart, or rather it should be all the time.
After about 2 minutes of such reboots, the GPU core is around 50C
Comment