I got the schematic - no shorts or anything.
Got +3valw and +5valw (PSU shows ZERO amps O_o)
When i press power there shows some minimal power drain up to 10mA +3VSUS and +5VSUS shows up then it goes to 0 after like 5-10 sec
Tried to meassure Pgood on diffirent mosfet drivers but there is none.
There is no +v1v
Flashed like 3 diffirent Bioses
Coil resistances :
GPU :
choke 3 and 4 got around 1.1Ohm
CPU :
pl1 - 14.5
pl2.3.4 - 2.2
pl5 - 4.5
PCH :
pl11 - 35.5
GPU RAM:
choke 1 - 127
Any help?
Can i check something yet w/o replacing EC (can you test EC (in circuit)?)
Im no expert i got pretty basic understanding of electronics but i dont want to give up
Got +3valw and +5valw (PSU shows ZERO amps O_o)
When i press power there shows some minimal power drain up to 10mA +3VSUS and +5VSUS shows up then it goes to 0 after like 5-10 sec
Tried to meassure Pgood on diffirent mosfet drivers but there is none.
There is no +v1v
Flashed like 3 diffirent Bioses
Coil resistances :
GPU :
choke 3 and 4 got around 1.1Ohm
CPU :
pl1 - 14.5
pl2.3.4 - 2.2
pl5 - 4.5
PCH :
pl11 - 35.5
GPU RAM:
choke 1 - 127
Any help?
Can i check something yet w/o replacing EC (can you test EC (in circuit)?)
Im no expert i got pretty basic understanding of electronics but i dont want to give up
Comment