Hello.
Have this HP 15 da0u36mb6d0 rev d bios that start without video.
I chceck that have no power to CPU and GPU. to NCP6132B comes power, but on EN pin is 1.05V. On that pin must be logic HIGH but 1V is quite low to me. i flashed bios and EC but still the same. Other voltages is all good
What u think?
Have this HP 15 da0u36mb6d0 rev d bios that start without video.
I chceck that have no power to CPU and GPU. to NCP6132B comes power, but on EN pin is 1.05V. On that pin must be logic HIGH but 1V is quite low to me. i flashed bios and EC but still the same. Other voltages is all good
What u think?