Hello i've posted before under some old thread but anyway i got new led screen for ux31 and it wont work even when i shine into it with a flashlight i don't see anything
the thing is when i was cleaning it with wet paper towel the little wet bit got inside of mini dp port and after an hour or so the display started to get strange white spots which then all of a sudden died on me... after that i was checking for problems with multi-meter and accidentally shorted the lvds display connector the sort created a bright spark..
cap burned
https://imgur.com/a/zhDXnew
i even try to replace it with almost same looking cap but it still won't work
https://imgur.com/a/ccbI0gG
Does somebody knows where i can buy the right cap for this motherboard?And is it this cap which is why i cant get my new screen to work or is it the lvds connector or maybe something else ?
http://imgur.com/a/J6YOMvC
Yellow mark the dp port where the bits of wet paper towel were found(I've already removed the whole dp unit it)
Purple mark is the display cable connector where i've made the second short,
Red mark is the blown smd capacitor which is located on the other side.
Thank you
the thing is when i was cleaning it with wet paper towel the little wet bit got inside of mini dp port and after an hour or so the display started to get strange white spots which then all of a sudden died on me... after that i was checking for problems with multi-meter and accidentally shorted the lvds display connector the sort created a bright spark..
cap burned
https://imgur.com/a/zhDXnew
i even try to replace it with almost same looking cap but it still won't work
https://imgur.com/a/ccbI0gG
Does somebody knows where i can buy the right cap for this motherboard?And is it this cap which is why i cant get my new screen to work or is it the lvds connector or maybe something else ?
http://imgur.com/a/J6YOMvC
Yellow mark the dp port where the bits of wet paper towel were found(I've already removed the whole dp unit it)
Purple mark is the display cable connector where i've made the second short,
Red mark is the blown smd capacitor which is located on the other side.
Thank you
Comment