HP 15 ( R62 ) dont turn on : POST CODE F9

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • delphi_firebird
    Member
    • Mar 2015
    • 36
    • France
    #1

    HP 15 ( R62 ) dont turn on : POST CODE F9

    Hello ,

    I have an HP15 R62 DA0R62MB6E1 REV E motherboard that won't turn on .

    I flashed bios , change RAM , CPU .. same problem .

    The debug card show that it is posting and stops on code F9 .

    Could someone help me to figure out the solution?

    Thank you by advance .
    Tags: None
    • mcplslg123
      Badcaps Legend
      • Jun 2015
      • 7262
      • india
      #2
      Re: HP 15 ( R62 ) dont turn on : POST CODE F9

      The reason can be so many things. you need to descrive what voltage rails are present. Does the dc jack light glows?? Check +3VA_EC, EC_RSMRST #,PWROK #,PWR_SW #. on kbc pins

        Comment

        Previous template Next

        Related Topics

        Collapse
        • DynaxSC
          MSI PRO Z690-A DDR4 (MS-7D25) - stuck during boot every second time - debug code 16 & A1
          by DynaxSC
          Hi Folks

          I have an MSI PRO Z690-A DDR4 (MS-7525) which underwent LGA1700 replacement and had a missing resistor in the VRM section. The missing resistor RV170 (49,9Ω) has been resoldered, and I have also replaced a demaged LGA1700 socket.

          Generally the board does boot to Windows, but not always in the first attempt, but after the second attemp to boot the board with Power Button. Also restarting the board from Windows ends up with stuck boot process, but restarting the board again (long push Power Button or switching off and on PSU). Under Windows etherything works          ...
          09-29-2024, 04:27 PM
        • DynaxSC
          Gigabyte Z390I AORUS PRO WIFI - Debug Code 18
          by DynaxSC
          Hi Folks,

          I have a Gigabyte Z390I AORUS PRO WIFI on the bench, this board had probably an electrical surge, as a few chips were burned, i.e. chipset, SIO, LAN chip and an OPAMP for generationg VCCSA and VCCIO. Now I replaced all the parts, including a chipset from another Gigabyte Z390 ATX board, and the board started to boot, but the boot process halts at debug code 18 (PCH LED active during the "18" code). The board after that restarts from scratch, and does this in an endless loop.

          Would aprreciate if anybody could provide some raliable info what this debug...
          07-18-2023, 08:54 AM
        • DynaxSC
          GIGABYTE GA-H110M-S2 - Stuck at Debug Code C2 - don't like Patriot Viper Steel RAM but works with G.SKILL
          by DynaxSC
          Hi,

          I discovered a strange behaviour of GIGABYTE GA-H110M-S2 board.

          General test conditions:
          - Tested with Core i5 6500 and Core I7 6700K - no difference
          - Default BIOS settings, but tried also altering several memory setting - does not change anything

          What is wrong:

          With BIOS F1 and F2 the board normally POST's and boots to Windows 11 with 2 x Patriot Viper Steel PVS416G440C9K RAM (4400MHZ, Samsung B-Die chips)

          When BIOS upgraded to anything above F2 (ie. F20-F27b) the board POST stucks after 3 Debug Codes on Code C2          ...
          03-21-2025, 06:23 PM
        • Document Archive
          LCD LED TV Service Menu Codes
          by Document Archive
          ALL LCD LED TV SERVICE MENU CODES

          Service Menu Code with Board Name

          China Universal Board / Jumper Board Service Menu Code
          Changhong Ruba Service Menu Code
          Ecostar LED TV Service Menu Code
          Orient LED TV Service Menu Code
          Haier LED TV Service Menu Code
          TCL LED TV Service Menu Code
          Samsung LED TV Service Menu Code
          LG LED TV Service Menu Code
          Videocon LED TV Service Menu Code
          Supra LED TV Service Menu Code
          Toshiba LED TV Service Menu Code
          Symphony LED TV Service Menu Code
          Veste/ LED TV Service Menu Code...
          10-31-2024, 03:58 AM
        • pajdek
          Lenovo Y700-17ISK turn on and off
          by pajdek
          Hello, i have some issues with my laptop Lenovo Y700-17ISK (motherboard BY511 NM-A541), it started when i turn on the laptop, but the lcd wont turn on, i then connected it via hdmi to tv and screen was ok. So i thought maybe lcd stripe is faulty, i removed the bottom cover, disconnected main battery, reset the cmos by disconnecting battery for 1 min, then slighty move the lcd stripe. Conncted power supply and tuned on my laptop, the lcd turn on, it started to load os, then it turn off, after a second it turn on, then after like 3 seconds turn off again, and so on. Removed power supply, waited...
          09-20-2023, 02:49 AM
        • Loading...
        • No more items.
        Working...