anybody know? Transfer VGA MacBook Pro A1297 820-2914 (17-inch late 2011)
http://laptopblue.com/threads/chuyen...ate-2011.48491 /
http://laptopblue.com/threads/chuyen...ate-2011.48491 /
-
Apple MacBook Pro 17 A1297 820-2914-A Boardview...
-
Apple MacBook Pro A1297 K20 Board View...10-03-2024, 01:20 PM
-
Apple MacBook Pro A1297 K92 Schematic & Board View...10-02-2024, 02:45 PM
-
I have a 2020 Macbook Pro A2289 and after many attempts managed to get it into DFU mode, using my older 2017 A1706 Macbook Pro (Running Ventura 13.7.8). However, when attempting 'Restore', it fails at step 4 of 4, showing the following error:
- "The operation couldn’t be completed. (AMRestoreErrorDomain error -1 - Failed to handle message type StatusMsg (Generic error)) [AMRestoreErrorDomain – 0xA (10)]
- "The system cannot be restored on this device. Failed to create new state machine for restore [com.apple.MobileDevice.MobileRestore - 0xFB1 (4017)]
...08-30-2025, 10:27 AM -
1. RESET MACOS WITH IPSW
a. Power off MacBook, press and hold the power button to enter Recovery
b. Open Disk Utility, remove Macintosh HD
c. Reboot, connect to the network to Activate Mac.
d. Plug the C cord in the first port of the MacBook into the other Mac, then power off the MacBook
d. Hold down the Control (L) + Option (L) + Shift (R) + Power key combination for 10 seconds
e. Release the other keys, but keep holding the Power key for another 10 seconds
f. MacBook is returned to DFU, open Apple Configurator 2 on the other Mac, right-click...