No CLKEN# at cpu core any advice

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • samanthban
    Badcaps Veteran
    • Feb 2014
    • 253
    • Sri lanka

    #1

    No CLKEN# at cpu core any advice






    This is cpu core supply regulator ,
    PWRGD voltage is ok at pin no 1 but CLKEN Voltage is not available at pin 40 .
    I'm not sure that cpu core regulator or something else. any expertise here please
    sigpic
  • samanthban
    Badcaps Veteran
    • Feb 2014
    • 253
    • Sri lanka

    #2
    Re: No CLKEN# at cpu core any advice

    sigpic

    Comment

    • atsio
      Badcaps Veteran
      • Oct 2013
      • 819
      • Greece

      #3
      Re: No CLKEN# at cpu core any advice

      clken# signal should be low. It's allright.

      Comment

      • keeney123
        Lauren
        • Sep 2014
        • 2536
        • United States

        #4
        Re: No CLKEN# at cpu core any advice

        I would go to this thread first and make sure you have not missed one of these basic things.

        https://www.badcaps.net/forum/showth...hlight=agent24

        Then you will need to post the correct schematic. What unit is this in or model number.

        Comment

        • chrisart
          New Member
          • Dec 2012
          • 7
          • philippines

          #5
          Re: No CLKEN# at cpu core any advice

          It should have voltage after pressing power button., i think this PIN40 can enable clock generator chip..

          Comment

          • samanthban
            Badcaps Veteran
            • Feb 2014
            • 253
            • Sri lanka

            #6
            Re: No CLKEN# at cpu core any advice

            Originally posted by atsio
            clken# signal should be low. It's allright.
            Thanks atsio you are correct and clkgen is fine

            Originally posted by keeney123
            I would go to this thread first and make sure you have not missed one of these basic things.

            https://www.badcaps.net/forum/showth...hlight=agent24
            Thanks
            Then you will need to post the correct schematic. What unit is this in or model number.
            Thanks

            Originally posted by chrisart
            It should have voltage after pressing power button., i think this PIN40 can enable clock generator chip..
            Thanks
            sigpic

            Comment

            Related Topics

            Collapse

            Working...