Hi every one , I got a Compaq cq 43 with no display, test
and find out termination supply was not ok .I want to change
the relevant ic but I have a doubt with ic number. schematic says RT 9045 GSP(page 12) and
board has -po109p sgk(one letter in front not able to read)This is not available may be a
wrong number but schematic one is available and schematic is correct.
Please advice
and find out termination supply was not ok .I want to change
the relevant ic but I have a doubt with ic number. schematic says RT 9045 GSP(page 12) and
board has -po109p sgk(one letter in front not able to read)This is not available may be a
wrong number but schematic one is available and schematic is correct.
Please advice
Comment