Toshiba P50-A-14H-PSPMHE VGSG_GS MB REV.2.1

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • teknikbursa
    Senior Member
    • Sep 2014
    • 64
    • turkey

    #1

    Toshiba P50-A-14H-PSPMHE VGSG_GS MB REV.2.1

    Toshiba P50-A-14H-PSPMHE
    VGSG_GS MB REV.2.1

    There is picture on panel but no backlight.

    LVDS cable and lcd panel changed.Bios programmed.but nothing changed

    any idea or schematic
  • dj_ricoh
    Badcaps Legend
    • Jan 2013
    • 2073
    • uk

    #2
    Re: Toshiba P50-A-14H-PSPMHE VGSG_GS MB REV.2.1

    Nobody can say nothing until we have the diagram.

    What V you got on lcd connector?
    Just cook it! It's already broken.

    Comment

    • teknikbursa
      Senior Member
      • Sep 2014
      • 64
      • turkey

      #3
      Re: Toshiba P50-A-14H-PSPMHE VGSG_GS MB REV.2.1

      Problem solved. a falullty inductor,near lvds port, changed.

      Comment

      • dj_ricoh
        Badcaps Legend
        • Jan 2013
        • 2073
        • uk

        #4
        Re: Toshiba P50-A-14H-PSPMHE VGSG_GS MB REV.2.1

        What pin was connected to that inductor?
        Just cook it! It's already broken.

        Comment

        • teknikbursa
          Senior Member
          • Sep 2014
          • 64
          • turkey

          #5
          Re: Toshiba P50-A-14H-PSPMHE VGSG_GS MB REV.2.1

          it was the pin1 should be 19v.
          without lcd panel it has 19v. but when we connect the lcd panel there is 12 v. The value of the inductor measured as 2.1 kohm should be 0 ohm.when changed inductor problem solved.

          Comment

          • dj_ricoh
            Badcaps Legend
            • Jan 2013
            • 2073
            • uk

            #6
            Re: Toshiba P50-A-14H-PSPMHE VGSG_GS MB REV.2.1

            Only the supply went down?

            Like 19 to 12 and all where ok?
            Just cook it! It's already broken.

            Comment

            • teknikbursa
              Senior Member
              • Sep 2014
              • 64
              • turkey

              #7
              Re: Toshiba P50-A-14H-PSPMHE VGSG_GS MB REV.2.1

              yes by faulty inductor when lcd panel installed power went down from 19 to 12
              but without lcd panel power was 19v.

              Comment

              • nejat4658
                Member
                • Mar 2014
                • 11
                • turkey

                #8
                Re: Toshiba P50-A-14H-PSPMHE VGSG_GS MB REV.2.1

                Toshiba P50-A-14H-PSPMHE VGSG_GS MB REV.2.1 bıos dökümü lazım

                Comment

                Related Topics

                Collapse

                • anlu
                  Vestel Firmware - Toshiba 32W133DN
                  by anlu
                  Hello, i have an old Toshiba 32W1333DN (sorry, misspelled the headline) TV that had the standby led green/red flashing and no lightup problem, i repaired it by measure the led output as suspect led problem, i measured the LED:s one by one and found one bad led, i replaced the the led-straps and the TV works.

                  Now i need to update the software because the new rc "RM-L890" does not work and i think maybe it could be an firmware issue?, i have struggled to find it without any success because all of the links where invalid, i contacted Toshiba but they do not support this model...
                  02-04-2023, 12:59 AM
                • TCCTech
                  HP Elitebook LVDS port
                  by TCCTech
                  Hi all, I appreciate any help at all on this I have an HP Elitebook 840 a customer spilled tea on it and it shorted/melted the LVDS port I found the schematic here

                  file:///E:/Users/BBB/Downloads/HP%20EliteBook%20840%20-%20ZBOOK%2014%206050A2559101-MB-AX1%20COMET%20DIS%20SI2%20Schematics.pdf

                  But i can not find the part number for the LVDS port if anyone knows where I can get a LVDS port I would appreciate it. Every time I google it I get lots of LVDS cables but not the port/connector.


                  Thank you in advanced...
                  09-02-2022, 05:18 PM
                • cheeky2
                  Toshiba 49U7763DB (Mainboard: Vestel 17MB120) firmware issues after sporadic power cu
                  by cheeky2
                  I have this Toshiba 49U7763DB Tv which was suffering issues after various electrical power cuts, which happened in quick succession
                  Originally the TV was powering on and then very shortly powering off. I managed to get into the menu structure before powering off and carry out a first time installation of the TV. Which didn't make much difference. I have managed to factory reset (that didn't make any difference either).
                  The firmware inside the 17MB120 is corrupted and is causing some strange issues so my question is does anyone have any suitable firmware for this model?
                  Details:...
                  08-17-2023, 04:34 AM
                • Scincidae
                  UN70NU6900FXZA Won't Boot Unless I Temporarily Disconnect Right LVDS Ribbon
                  by Scincidae
                  I recently was given a UN70NU6900FXZA that would only boot loop once plugged in (auto powers on when plugged in). I found that disconnecting the lower (right side) LVDS ribbon, then plugging the TV in, followed by reconnecting the lower LVDS ribbon will allow the TV to work 100% normal as far as I can tell (no lines, no discoloration, no dimming or anything like that).

                  I tried the tape method on the lower LVDS ribbon and found that if I cover pins 10 and 11 (counting from the bottom up) allows the TV to boot normal but 25% screen all the way to the right side is discolored. While...
                  04-24-2022, 06:00 PM
                • zioricci
                  Bios .BIN for Toshiba P855-34k ?
                  by zioricci
                  Hi everyone,

                  I've had a Toshiba P855-34k in my drawer for a few years which stopped at the Toshiba logo when started without going forward and without being able to even enter the bios with F2 F1 Esc Del etc... I tried them all, CMOS reset etc. .. and checked all the voltages of the important chips on the motherboard and they are correct. Thinking that the bios was corrupted, with CH341A programmer I tried to load the 2 -BIN files that I found on the internet but now I don't even see the Toshiba logo :-D Checking with Winhex I saw that the EC file has no header and is full of FF...
                  03-28-2023, 07:00 AM
                • Loading...
                • No more items.
                Working...