well got this from another store , mentioning machine was shuting down randomly , after making some measurements all seems fine on the charging circuit .. now the trouble comes here .. if i leave the lvds conneccted , it showed image perfectly , and if its working only with dc jack (without battery works fine) if i insert dc jack plus battery , i turn on machine (turning it on on my power supply of the lab , i notice the 3.2 amp (since its charging battery , after like 10 seconds , power and battery led start blinking in orange , and the power lab show me 0 amp consume .. but still the computer showing image , after a while it will shutdown .
power led should be white , and it turns white , but start blinking in orange with the led charge as well ,
NOW .. if i remove the lvds screen and leave only on external screen , there are no issues to report . charges ok , leds stays ok , and no shuting down , O.o ????
tryed diferente battery ,still the same . tryed a diferent screen , the same .. so on external work fine , if i insert internal screen , it will stay crazy .. anyone had this issue before ?
i apreciate any feedback
power led should be white , and it turns white , but start blinking in orange with the led charge as well ,
NOW .. if i remove the lvds screen and leave only on external screen , there are no issues to report . charges ok , leds stays ok , and no shuting down , O.o ????
tryed diferente battery ,still the same . tryed a diferent screen , the same .. so on external work fine , if i insert internal screen , it will stay crazy .. anyone had this issue before ?
i apreciate any feedback
finally I found the flaw , which were some tracks were removed from the motherboard , I just picture a bridge and back to normal .
Comment