Going over the pictures attached. I have an open circuit between ground and 19V at charger port. I have 5V and 3.3V at their respective inductors. The other three inductors near the CPU measure 1.8V except PLG1 which measures 0V. When the battery is plugged in I get around 9V on pins 7 and 8 at PJP201 but I believe it should be closer to 12~13V. I have the motherboard fully removed and disconnected from peripherals. Please let me know if you need additional information/next steps guidance. Thanks!
Here's the link to the schematic: https://www.badcaps.net/forum/troubl...=1#post1199669
Here's the link to the schematic: https://www.badcaps.net/forum/troubl...=1#post1199669