Help identify a component in asus vivobook

[koby058]

Hi

While trying to replace intersil 9241H, i have knocked out some component (maybe a capacitor) that was connected to pin 29
board model: DAZJ2SMBAF0 Rev: F

attached the best picture i found (marked on the second pic)

9241 DataSheet: https://www.farnell.com/datasheets/2710985.pdf

[ianbak]

Looking at the application diagrams for the 9241H, Intersil recommend using an R/C filter on pin 29 (AMON/BMON). So if one of the pads of the missing component is connected to pin 29 and the other to ground, then it would seem very likely that you have knocked off the capacitor that forms part of the R/C filter. I have no idea what value you should replace it with - the only way to find out is to find a circuit diagram or measure another motherboard. That said, if this is the case then the laptop will almost certainly work absolutely fine with the capactor missing!

[rddube]

I think this is what you need. Look under U8000. If this isn't the right boardview for yours, find the right one and you'll get your answer. Good luck!

https://www.badcaps.net/forum/troubl...proper-fz-file

[koby058]

thanks