Hello
I saw that the topic has already been discussed, regarding the backlighting of this notebook or similar IDEAPAD 5 15IIL05, I anticipate that I have already replaced the fuse that was burned, but I still do not have the backlighting, I was thinking it could be the display because following the breakage of a hinge due to a fall in the broken corner there was a continuous rubbing, it worked for a while anyway, then it turned off, the lvds cable was also replaced, before thinking about the display I would like to take some measurements to understand if I have the right voltages on the lvds cable pins, could you help me kindly thanks
I saw that the topic has already been discussed, regarding the backlighting of this notebook or similar IDEAPAD 5 15IIL05, I anticipate that I have already replaced the fuse that was burned, but I still do not have the backlighting, I was thinking it could be the display because following the breakage of a hinge due to a fall in the broken corner there was a continuous rubbing, it worked for a while anyway, then it turned off, the lvds cable was also replaced, before thinking about the display I would like to take some measurements to understand if I have the right voltages on the lvds cable pins, could you help me kindly thanks