Asus Strix G15-G512LV G532LWS

[Shulgin]

Hello guys,
I have this motherboard that does not power on. The 3.3V (+3VA_DSW) is missing, but the 5V (+5VSUS) is present. Both voltages are generated by PU8701 (see photo). By taking measurements on PU8701 I see that the signal EN2 (for the 3.3V) is at 0V while EN1 (for the 5V) is at 3.3V, which explains why I do not have the voltage. Both signals come from the same component, IT5125VG-128/CX which is the EC. I think the EC is good because I would not have EN1.
Do you have any idea?
Schema and BV in attachment.
Thanks

[Shulgin]

I forgot to specify that the coil associated with the 3.3V voltage (3VA_DSW) is not short-circuited to ground, and I do not see any short circuit during my measurements.

[FriedFred]

You can force the EN pin to 3.3V with a let's say 1kOhm resistor and try to enable 3V3 by yourself. Can you force the "3VA_DSW" to turn-on?

[Shulgin]

I did this and success to force the 3VA_DSW

[pc_okay]

Is laptop Working fine now?

[Shulgin]

No

[pc_okay]

Try to reflow IT5125VG and reballs if doesnt work replace if it still doenst fix.
Maybe some balls are cracked...