acer aspire one d270 no power..
good day to all laptop master.. I have acer d270 netbook the problem is no power.. i get 19 volts from the dc port and other component connecting to the power rail.. the main concern is no 3 volts and 5 volts are present..
-
-
Re: acer aspire one d270 no power..
check voltages around 3v 5v alws ic and also on battery connector -
Re: acer aspire one d270 no power..
good day to all,i also have acer d270,in my case i have 3v 5v always but still it wont turn on,any idea?thanksComment
-
Re: acer aspire one d270 no power..
hunter,
i had similar issue... with aux voltage but no alw
backup bios
download new one and flash bios using programmer
if nothing happens, restore backup
try reflowing pu3 tooLast edited by fddizon; 09-05-2014, 01:00 AM.Comment
-
Re: acer aspire one d270 no power..
This laptop got a problem with it printed circuit board .if you have oven bake it , or use a hot air gun to reflow all the board . It will work but for how long ?????Comment
-
Re: acer aspire one d270 no power..
mang tomas,
try discharging first.
try reflowing sio and pu3Last edited by fddizon; 09-05-2014, 01:00 AM.Comment
-
Re: acer aspire one d270 no power..
hunter,
i am assuming you have checked vin voltage since both output are not present.Comment
-
Re: acer aspire one d270 no power..
try changing your novuton npce791l,it works with meComment
-
This specification for the ACER Aspire Aspire G7200 Predator Defender can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the Aspire Aspire G7200 Predator Defender boardview and Aspire Aspire G7200 Predator Defender schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer...09-12-2024, 03:28 PM
-
This specification for the ACER Aspire Aspire X1300 can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the Aspire Aspire X1300 boardview and Aspire Aspire X1300 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or...09-12-2024, 03:28 PM
-
This specification for the Acer Aspire Aspire One 532h Netbook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Aspire One 532h boardview and Aspire One 532h schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or...09-06-2024, 05:27 AM
-
Dear all, I am trying to troubleshoot an Acer Aspire 5 A514-55 that won't power on. I'll describe the symptoms and my findings so far, and I would like to seek guidance and suggestions on possible suspects in terms of cause/component failure. My initial thoughts are battery charger IC and/or ideal diode/MOSFET (that switches between incoming DC and battery power), but I could be totally wrong on this.1) Laptop was working fine on battery, then user realised battery was running low. Plugged in AC adapter but noticed it was not charging (LED on AC adapter plug did not light). Eventually shut down... -
HI everybody, i need help with this laptop
Acer aspire one d270
mobo quanta ze7.
the laptop doesn't powerup, battery charges properly full battery blue light its present.
+5vpcu and +3vpcu are present, after pressing power button +5V-S5, +3V-S5,EC RSMRST#(3.3V) and DNBSWON(3.3V) gets enabled for few seconds and then goes off.
I followed the service manual power sequence 30 pin connector in page 16 after pin 7 DNBSWON# i have nothing, i don't have any voltages on SUSC# SUSB# SUSON MAINON.
any help will be appreciated.
https:...12-03-2023, 10:42 PM
Comment