Asus x430un rev 2.1 - Disable RAM

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • igor1991
    Member
    • Jun 2018
    • 30
    • ukraine

    #1

    Asus x430un rev 2.1 - Disable RAM

    Hello.. Help disable the RAM on the board. Maybe someone has a schematic for this board?
    Asus Asus S430UF (BOARD x430un rev 2.1)
  • SMDFlea
    Super Moderator
    • Jan 2018
    • 20781
    • UK

    #2
    Schematic requests go here --> https://www.badcaps.net/forum/troubl...-requests-only
    All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

    Comment

    Related Topics

    Collapse

    • Tynan Dill
      Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
      by Tynan Dill
      I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

      Upon bringing it home and plugging it up, it showed a standby light.

      I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

      The screen seems to blackout and stay black, but with a flashlight I can see the display.

      With my Playstation 4 connected via HDMI, and running a game I can hear sound.

      Assuming...
      11-22-2024, 01:46 PM
    • Paras Sharma
      ASUS VivoBook Flip TP412FAC disable on board ram
      by Paras Sharma
      anyone can disable on board ram through bios editing because the internal ram is damaged. so that i can use only removable ram and bypass bsod errors of bad ram
      06-05-2025, 03:30 AM
    • DynaxSC
      ASUS STRIX Z490-F GAMING - No POST, stubborn board
      by DynaxSC
      Hi,

      I have this very stubborn ASUS mobo on the bench, and I already face the wall with it. It just refuses to POST, although everything seems to be OK.

      The situation looks like this:

      After connecting the board to the power supply on Nuvoton (SLP_S3#, pin 64), the Low signal (50 ohm resistance) appears immediately. PWRNTN# signal goes through Nuvoton to the chipset (confirmed after removing the chipset). The following conditions are then met for the chipset to generate the SLP_S3# signal:

      1. RTC oscillates normally (32.768KHz).
      ...
      07-08-2022, 05:45 AM
    • howardc64
      TCL 55S425 few horizontal lines, potential failure on both side of panel/buffer board
      by howardc64
      All left and right refers to looking from rear of TV (or looking from front with TV upside down)
      • TV came with vertical bars and no image. Found faulty TVS on left buffer board. Also replaced T-Con (may have damaged the original while hot air removing components, board has slight warp) and have full image but few horizontal lines on the screen. Some of the lines appears to be 2 pixel tall while others are 1 pixel tall.
      • Disconnecting left and right buffer board potentially reveals problems on both sides with different signals (unless this T-Con require jumper like Samsung FB_TRDY1&3) Fault
      ...
      07-24-2025, 05:17 PM
    • ShadowAi12
      ASUS ROG STRIX B550-F GAMING — Board not powering on properly
      by ShadowAi12
      Hi,
      I recently bought an ASUS ROG STRIX B550-F GAMING motherboard that was listed as "dead, not powering on." However, it does show some signs of life. I've performed several basic measurements and would like to share the results.
      • The board enters a "ready to power on" state after plugging in the PSU.
      • Pressing the power button increases power draw.
      • Sometimes, touching the RSMRST_L pad with a multimeter probe causes the board to shut off and return to standby.
      Measurements:
      (taken after pressing the power button, while the board is attempting to start)
      • H_SKTOOC#
      ...
      06-11-2025, 01:05 PM
    • Loading...
    • No more items.
    Working...