Microsoft surface laptop 1gen USB doesn't recognize out side of UEFI

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • John1996
    New Member
    • Jun 2024
    • 2
    • Yersvan
    #1

    Microsoft surface laptop 1gen USB doesn't recognize out side of UEFI

    Hi all,
    I've faced to problem. I've installed win11 on surfaces laptop 1gen
    And USB port stop working, after reinstall windows several times it has dumbed
    Now there is no OS on laptop and USB port doesn't recognize after bios.
    I've tried recovery imagine same.

    How can I install os on laptops
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • flibidy
      Magnum IA.100 Amplifier Switches on, No Output, Possible Input Side fault?
      by flibidy
      I have here a Magnum IA.100 which belongs to my parents.



      The unit powers on & when the relay kicks in, you get a pop from the speakers (this might sound weird but is usual behavior for this amp). However, you get nothing coming through it from any of the inputs & no pops and crackls from any of the controls.


      Because of the sound from the speaker when the amp turns on I have assumed that the output section probably works but I could be wrong & I'm not sure how to test that side of things further.


      What Ive done........
      Magnum IA.100 Front
      8 Photos
      01-01-2025, 01:26 PM
    • bouny56
      Lenovo E15 Nm-c421 usb-c work only in one side
      by bouny56
      ​Hello

      Laptop E15 I5 10gen
      Mb nm-c421

      I have a problem with the usb-c power dc.
      The motherboard start only in one side of the usb-c

      Replace the usb-c port 2 times same problem

      With the usb-c meter, one side 20v ok, other side the usb-c meter don't come on

      Try to test the pin with the Mechanic Tail insertion tester and every pin are ok ?

      Can the pd controler be the fault ? Or something else maybe ?

      Thx

      ...
      02-11-2025, 03:15 AM
    • m3vuv
      getting an hp elitebook 8730w to work with a gpt drive with uefi
      by m3vuv
      Its a bit of a long tale but i swapped the original hd for a 2tb ssd,i want about 6 bootable partitions,it needs the uefi enabling in the bios,I am ok with that,the issue is i cant convert the drive to gpt when it has data on it,the issue is windows wont install to a gpt drive,there is a utility from hp to install the efi partition on the drive but it runs on windows,its a chicken and egg thing,can anyone explaine how hp did this?,I am pulling my hair out;it seems i need to run the hp uefi tool to make the uefi option work in the bios, but it needs windows to run this that wont install on a gpt...
      07-15-2024, 10:15 AM
    • CronaxFD
      Is unlocking UEFI worth the hassle? (Surface Pro 4)
      by CronaxFD
      Hey guys,

      Bought myself Surface Pro 4 tablet today on a local craigslist-type website.
      I've seen that UEFI was password protected and of course the seller forgot the password, but decided to buy it anyway.
      Really needed such a tablet to use with RomRaider to do some logging/tuning on my car.
      It has secure boot turned off and boots from USB, so I've formatted SSD and have done clean win10 install.

      Works fine, but wanted to ask, are there any real security risks associated with UEFI settings on Surface (remote access etc.)?

      From what I've...
      03-14-2024, 12:42 PM
    • howardc64
      TCL 55S425 few horizontal lines, potential failure on both side of panel/buffer board
      by howardc64
      All left and right refers to looking from rear of TV (or looking from front with TV upside down)
      • TV came with vertical bars and no image. Found faulty TVS on left buffer board. Also replaced T-Con (may have damaged the original while hot air removing components, board has slight warp) and have full image but few horizontal lines on the screen. Some of the lines appears to be 2 pixel tall while others are 1 pixel tall.
      • Disconnecting left and right buffer board potentially reveals problems on both sides with different signals (unless this T-Con require jumper like Samsung FB_TRDY1&3) Fault
      ...
      07-24-2025, 05:17 PM
    • Loading...
    • No more items.
    Working...