Lenovo IdeaPad 3 14ADA05 bsod

[warsztat]

Lenovo IdeaPad 3 14ADA05 bsod "page fault in nonpaged area" ,sometimes the device works fine all day but the next day it displays this message from time to time.
Replacing the RAM and SSD drive and new Windows installation did not change anything, the error still appears.
I noticed that the laptop turns on by itself after lifting the screen, but I did not find such a function in the BIOS.
Can this be set in windows?
I wonder if it makes sense to program the BIOS.
Has anyone had this happen before and how did you deal with it?

[mcplslg123]

I noticed that the laptop turns on by itself after lifting the screen-'coz there is an option in bios called flip to boot or similar.
These lenovo's are notorious for these kind of fault due to very poor quality of soldering on the board. Confirm when there is BSOD, does one of the cpu core phase coil voltage disappears?

[warsztat]

I have not noticed any voltage loss on the phase coils, perhaps it is temporary.
I have similar thoughts, I notice more and more faults in laptops of this brand and sometimes resoldering the pre-processor helps, but the faults keep coming back, so I have doubts whether it is a problem of soldering. Maby this fault processors.

[mcplslg123]

Its not the processor which is faulty. Try desoldering all controllers and mosfets in vcore circuit. Put some goodquality flux and apply fresh tin on the pads and solder them back. Allow it to cool for one whole day(very important) and test next morning. Hopefully BSOD will disappear.
Be careful while applying heat as nearby components flies away on heating. So advised to use kapton tape before de soldering.