Asus X512FF

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Luís Amaral
    Senior Member
    • Nov 2013
    • 78
    • Portugal

    #1

    Asus X512FF

    Hello guys, i am working on a X512FF motherboard that comes dead, 19V stops on first mosfet, Gate only have 3v... if a make a bypass laptops works great with no problem... already tested the 5 mosfets, if i remove the current sensor PRS8901, the 19v appear...
    Something with the 19V line and the charger detects and stop working !


    Any advices ?
  • Luís Amaral
    Senior Member
    • Nov 2013
    • 78
    • Portugal

    #2
    No one ? any tip ?

    Comment

    • mon2
      Badcaps Legend
      • Dec 2019
      • 13994
      • Canada

      #3
      Link a schematic if available but only using the dedicated schematic forum.

      With no power to the board, meter in resistance mode, measure the resistance to ground on each side of PRS8901.

      Post the measurements.

      Comment

      • Bonzas
        Badcaps Veteran
        • Jan 2018
        • 469
        • Indonesia

        #4
        what charging ic that used on the board ?

        Comment

        • Luís Amaral
          Senior Member
          • Nov 2013
          • 78
          • Portugal

          #5
          i solved the problem, it was one of the battery mosfets

          Comment

          Related Topics

          Collapse

          Working...