Hi, Acer board., Not starting fully. Its charging fine .
3.3 and 5 volts present/perfect . At power switch 3.11 volt showing
Board starts and consumes 0.01Amps
Replaced I/O NCPE781 chip also, But no change, what else could i check
Thanks
[MOD EDIT] Link to Schematic -> https://www.badcaps.net/forum/troubl...b8a0-schematic
Reminder: rules and organization of this section -> https://www.badcaps.net/forum/troubl...f-this-section
3.3 and 5 volts present/perfect . At power switch 3.11 volt showing
Board starts and consumes 0.01Amps
Replaced I/O NCPE781 chip also, But no change, what else could i check
Thanks
[MOD EDIT] Link to Schematic -> https://www.badcaps.net/forum/troubl...b8a0-schematic
Reminder: rules and organization of this section -> https://www.badcaps.net/forum/troubl...f-this-section
Comment